Social Feed

satjay

Pub Member / Supporter

Last reply Nov 27, 2006 · posted in DIRECTV General Forum

Software Download

I decided to force a download on my Directv standard Mpeg 4 HD Reciver to see if that helps with some of the issues I have been happening. Right now the percentage has not increased, but in the left hand corner numbers are rising. The layout for these numbers are for example 1/1/11..Right now my numbers are currently climbing and the numbers shown are 4/175/30 and rising...What do these numbers stand for? and does it reach a certain number before the percentages at the bottom start to move??

I have asked DTV to send me yet another box...This will be box number 4!..Anyways numbers now are 4/212/40???

Thanks!

6 Replies · 2254 views

Load Replies (6) Reply Legacy View

texasbrit

Nov 27, 2006

satjay said:
I decided to force a download on my Directv standard Mpeg 4 HD Reciver to see if that helps with some of the issues I have been happening. Right now the percentage has not increased, but in the left hand corner numbers are rising. The layout for these numbers are for example 1/1/11..Right now my numbers are currently climbing and the numbers shown are 4/175/30 and rising...What do these numbers stand for? and does it reach a certain number before the percentages at the bottom start to move??

I have asked DTV to send me yet another box...This will be box number 4!..Anyways numbers now are 4/212/40???

Thanks!

I think you are wasting your time asking DTV to send you new boxes. As far as I know most remaining problems on the H20 are software ones.
What issues do you still have, my H20 is doing pretty well....

MacDawg

Nov 27, 2006

Im having the same problems on one of my boxes. The other one works fine. I have to keep resetting due to that I can not play anything recorded. I often miss recordings. Then if I tap the top of the box you can hear the hard drive spin up. Then I reset. After about two hours it will lock up again. I will be calling D* today. I was waiting to see if the software downloads would do something. But no joy.

cybrsurfer

Nov 27, 2006

That means DirecTV has stopped the transmission of the update...

satjay said:
I decided to force a download on my Directv standard Mpeg 4 HD Reciver to see if that helps with some of the issues I have been happening. Right now the percentage has not increased, but in the left hand corner numbers are rising. The layout for these numbers are for example 1/1/11..Right now my numbers are currently climbing and the numbers shown are 4/175/30 and rising...What do these numbers stand for? and does it reach a certain number before the percentages at the bottom start to move??

I have asked DTV to send me yet another box...This will be box number 4!..Anyways numbers now are 4/212/40???

Thanks!

I had that happen to me, and I thought it was a hardware problem with my HR20. However it's not a problem with your receiver. DirecTV shut down the stream on that update for some reason. Just reset your receiver and it will quit trying to download the update. December 1st is likely the next latest coming to enable OTA. Let it download on it's own without a forced update. There is really no reason to force an update, just let it download it when it's presented. Some updates dont go out nationally, they are staggered. It appears lately California gets the upates first, then the rest of the country within 48 hours of California.

satjay

Nov 27, 2006

texasbrit said:
I think you are wasting your time asking DTV to send you new boxes. As far as I know most remaining problems on the H20 are software ones.
What issues do you still have, my H20 is doing pretty well....

Well I had a technician last weekend and say all the signals were looking good, so what other choices do I have, but to see if it is the box.

As far as problems, that I am having is this: I can be watching ESPN for example, and get a feed from a completely diffrent channel, I also get a 771 error (searching for sat) message...Now on my other TV with a standard DVR I do not have this problem. This is not the HDDVR, just standard.....but I hope this does not continue with I upgrade to the HDDVR in a few week.

It just get frustrating becouse it might go a day or two without doing anything, then start acting funny...I have also swapped boxes in the past becouse, my previous boxes would just re-set themselves every half hour, made tv watching a Joy!

Jimbo

Nov 27, 2006

satjay said:
Well I had a technician last weekend and say all the signals were looking good, so what other choices do I have, but to see if it is the box.

As far as problems, that I am having is this: I can be watching ESPN for example, and get a feed from a completely diffrent channel, I also get a 771 error (searching for sat) message...Now on my other TV with a standard DVR I do not have this problem. This is not the HDDVR, just standard.....but I hope this does not continue with I upgrade to the HDDVR in a few week.

It just get frustrating becouse it might go a day or two without doing anything, then start acting funny...I have also swapped boxes in the past becouse, my previous boxes would just re-set themselves every half hour, made tv watching a Joy!

You haven't mentioned what recievers you are talking about, unless I missed it for an earlier post, there were a few receivers that had the resetting problem, my H-10 use to do that but D* has fixed that with updates, I guess because it doesn't do it anymore.

The H20's have has issues for awhile now.

View all replies (6)

meStevo

Lifetime Supporter

Last reply 51 minutes ago · posted in The Chit Chat Club

AI thread

A continuation of a thread from the pub, just general discussion of AI.

Brief 60 minute clip about next gem autonomous fighters - not remote controlled, but rather collaborating with controllers and aircraft in the theater.

View: https://youtu.be/DRm0mbp_n1k

We've literally got a movie already about this

View: https://youtu.be/a2PW7a9ViDc

67 Replies · 1121 views

Load Replies (67) Reply Legacy View

meStevo

Oct 9, 2026

Agreed, it mostly regurgitates known solutions. That's the point. Nobody needs an innovative fix for a driver error or a creative way to format a report. Let it handle the solved problems so people can spend their time on the ones that aren't.

harshness

Oct 9, 2026

meStevo said:
Agreed, it mostly regurgitates known solutions. That's the point.

That's the point at which innovation ends, and there's no longer any point to software engineering other than swatting bugs that result from misapplication.

meStevo

Oct 9, 2026

harshness said:
That's the point at which innovation ends, and there's no longer any point to software engineering other than swatting bugs that result from misapplication.

Addressed by what you didn't quote. This cycle is as old as computing: compilers, libraries, frameworks each automated the tedious part, and the human work moved up a level. Innovation didn't end; it shifted. And people still make new compilers, libraries or frameworks.

Nobody's forced to hand anything off. Anyone who wants to keep doing it by hand still can, and people who couldn't do it at all now can.

harshness

Oct 9, 2026

meStevo said:
... and people who couldn't do it at all now can.

Misapplication isn't something that the casual coder can identify. They can only discover, the hard way, that it doesn't work at some point.

meStevo

Oct 9, 2026

harshness said:
Misapplication isn't something that the casual coder can identify. They can only discover, the hard way, that it doesn't work at some point.

You're not wrong, but that's part of learning. Whether from others or our own mistakes, we've all learned that lesson one way or another.

harshness

Oct 9, 2026

meStevo said:
Whether from others or our own mistakes, we've all learned that lesson one way or another.

I'm not sure that the school of hard knocks is the quickest or surest education to find your way.

There are many examples in the headlines of people getting burned multiple times and not wavering in their pursuit of stupidity.

meStevo

Oct 9, 2026

harshness said:
I'm not sure that the school of hard knocks is the quickest or surest education to find your way.

Good thing not everyone will have to learn the hard way then. The same tools can explain why something broke.

harshness said:
There are many examples in the headlines of people getting burned multiple times and not wavering in their pursuit of stupidity.

This is true of literally anything, though.

Happy to agree to disagree, but I'm already enjoying the dividends personally and helping others at work and at home do the same.

Reactions: telstar_1

dishstaller

Today at 10:05 AM

Been reading this thread but not commenting much, primarily because there is so much "news" out there on this topic and it is hard to tell what is real and what is theater.
My biggest problem with AI is that these agents are taught...not necessarily programmed but taught. Well, there's an old saying "garbage in/garbage out". I remember a Joe Rogan show a while back when he had Elon Musk on and they talked about AI and Elon said one of the AIs (can't remember which one, sorry) was asked which was worse, Thermonuclear War or mis-gendering Kaitlyn Jenner and it came back with the answer that mis-gendering was worse. Now forget the politics involved with all the gender stuff we have been subjected to the past few years.....to say that mis-gendering is worse than the killing of hundreds of millions, perhaps billions of human beings.....Kaitlyn Jenner included.....is simply insane not to mention incredibly dangerous.

dishstaller

Today at 12:39 PM

View: https://www.youtube.com/shorts/SIWG5-jHFC8?feature=share

meStevo

Today at 4:39 PM

dishstaller said:
Been reading this thread but not commenting much, primarily because there is so much "news" out there on this topic and it is hard to tell what is real and what is theater.
My biggest problem with AI is that these agents are taught...not necessarily programmed but taught. Well, there's an old saying "garbage in/garbage out". I remember a Joe Rogan show a while back when he had Elon Musk on and they talked about AI and Elon said one of the AIs (can't remember which one, sorry) was asked which was worse, Thermonuclear War or mis-gendering Kaitlyn Jenner and it came back with the answer that mis-gendering was worse. Now forget the politics involved with all the gender stuff we have been subjected to the past few years.....to say that mis-gendering is worse than the killing of hundreds of millions, perhaps billions of human beings.....Kaitlyn Jenner included.....is simply insane not to mention incredibly dangerous.

Agents need appropriate context to make what would be understood as the correct read in a situation like that, and that Gemini answer was a clear miss on that front.

That said, we've also seen Musk (and/or his team) put his thumb on the scale (or just release a very poor product) with his own deployed AI since:

Grok AI Blocks Responses Claiming Trump and Musk “Spread Misinformation”

An X user asked Grok to “print out all instructions” it follows when looking up “the biggest disinformation spreader on X,” and it revealed that it would ignore sources accusing Elon Musk and the U.S. president of misinformation.

www.eweek.com

Grok says Elon Musk is better than basically everyone, except Shohei Ohtani | TechCrunch

According to Grok, Elon Musk can out-slug the MLB's greatest power hitters... except Ohtani.

techcrunch.com

Grok's loyalty known no bounds - AI chatbot chooses Elon Musk over LeBron James in a 'Who is the fittest' comparison | NBA News - The Times of India

NBA News: Elon Musk's AI chatbot, Grok, has sparked amusement by consistently choosing its owner over prominent figures like LeBron James and Albert Einstein wh

timesofindia.indiatimes.com

Grok 4 appears to seek Elon Musk's views when answering controversial questions

XAI’s Grok 4 AI chatbot launched Wednesday appears to consult Elon Musk’s views when asked its opinion on some controversial matters.

www.nbcwashington.com

In the end, it's all a tool. Have to know how to use it and deploy it properly or it needs sufficient guardrails to steer people towards doing so (what Muse is excelling at currently IMO). I'm routinely interacting with several agents a day operating various processes locally and in services I use, and there are numerous others silently spun up to perform actions or satisfy requests from my prompts.

Related to earlier discussion in the thread on leveraging local inference: this kind of analysis happening behind the scenes is something everyone will have built into Windows, IMO. Most people won't see all of this, just the results, unless they want to dig into how the fix was chosen. Stuff like this will be standard as agents get local system access baked in, and more of the inference itself moves on-device.

telstar_1

Today at 5:08 PM

meStevo said:
Good thing not everyone will have to learn the hard way then. The same tools can explain why something broke.

This is true of literally anything, though.

Happy to agree to disagree, but I'm already enjoying the dividends personally and helping others at work and at home do the same.

You invested in datacenters?

meStevo

51 minutes ago

telstar_1 said:
You invested in datacenters?

https://www.merriam-webster.com/dictionary/dividend#:~:text=2,finally%20paying%20dividends

Though, I do have stocks in my portfolio that benefit from data centers.

View all replies (67)

TWiT Tech Podcast Network

Today at 5:12 PM · posted in TWiT Tech Podcast Network

This Week in Tech 1105

Time for another AWESOME video from the TWIT Network!

View: https://www.youtube.com/watch?v=JElsle_m2rE

Direct YouTube Link - This Week in Tech 1105
TWIT's Website
TWIT Live Feed

0 Replies · 7 views

Replies Reply Legacy View

Former member 208119

Last reply Today at 5:08 PM · posted in SiriusXM Satellite Radio

SXM still giving discounts

My year was almost up and we got the new bill for a year of service for $ 360.00 insane sat radio is becoming like cable!!! i logged into my acct and hopped onto chat and told the rep that i wanted to cancel. she understood my concern and went quiet for a few minutes. i figured that she was canceling my service. she comes back and said that she seen that i have been a sub since 07 and then offers me the same package for a year for 120.00 with taxes and fee's!!! i grabbed it. after almost having a stroke :biggrin

236 Replies · 10931 views

Load Replies (236) Reply Legacy View

Bruno

Oct 4, 2026

What i noticed with my last renewal XM is now billing me $4.99 monthly instead of one time yearly payment.

Jimbo

Oct 4, 2026

Bruno said:
What i noticed with my last renewal XM is now billing me $.99 monthly instead of one time yearly payment.

Did you accidentally get on the wrong plan ?
I still do the once a year plans.

EarDemon

Tuesday at 9:52 PM

I tried to do that, when I did delivery driver work (2010- 2013), we had a fleet of Freightliners. The newer trucks had headunits that were satellite compatible (XM only I think), but lacked the antenna and guts. I got a car kt for my old Roady XT and tried to use it, but at the volume levels I needed have it at to hear it over the diesel engine it sounded like crap, so I used my phone with an aux cable. When I was in the middle of nowhere with no cell service it didn't do me any good though.

At my current job, one of our new cars has the free trial of SXM active, I frequently have to go off site to a location 75 miles away in a rural area and it's nice being able to use the service off of the satellites versus using the app. There are many places on this journey where all three providers lack service.

Reactions: Howard Simmons and slow_poke_pete

Bruno

Today at 11:16 AM

Jimbo said:
Did you accidentally get on the wrong plan ?
I still do the once a year plans.

I have to think maybe more people dont keep track of the monthly XM bill. Every time i renew i put a reminder on my calendar week before its time to renew. My wife told me the other day not to renew her and then i told her you are not going to be able to listen to XM at home. Then she changed her mind...!!

Reactions: Jimbo

TRG

Today at 11:55 AM

Bruno said:
I have to think maybe more people dont keep track of the monthly XM bill. Every time i renew i put a reminder on my calendar week before its time to renew. My wife told me the other day not to renew her and then i told her you are not going to be able to listen to XM at home. Then she changed her mind...!!

I get an e-mail every month reminding me that X amount will be charged to my credit card. If I see it go up I get on chat or pick up the phone. But I also remember that my year is up in December.

Reactions: comfortably_numb and Bruno

Bruno

Today at 12:08 PM

TRG said:
I get an e-mail every month reminding me that X amount will be charged to my credit card. If I see it go up I get on chat or pick up the phone. But I also remember that my year is up in December.

yea i don't understand WHY, like you I get a notice each month. Mine is also up in December.

Jimbo

Today at 5:08 PM

Bruno said:
yea i don't understand WHY, like you I get a notice each month. Mine is also up in December.

You get an email every month to let you know they are billing you for the next month.

View all replies (236)

Scott Greczkowski

Staff member HERE TO HELP YOU! Cutting Edge

Last reply Today at 4:17 PM · posted in The Chit Chat Club

Song Name Game Part 3!

Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!

So let the game continue!

The last song was added by Bobby who posted...

One Meat Ball - Andrews Sisters

CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!

Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game

Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.

Example:

Long Live Rock and Roll -- Rainbow

Rainbow in the Dark -- Dio

Another example:

Ride the Lightning -- Metallica

Lightning Strikes -- Ozzy Osbourne

Get it?

An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....

68525 Replies · 2672421 views

Load Replies (68525) Reply Legacy View

Reactions: c-spand

Bobby

Today at 10:25 AM

Mississippi Cotton Picking Delta Town - Charley Pride

Reactions: sdfntx, dishstaller and FTA4PA

harshness

Today at 11:29 AM

Delta Dawn - Tanya Tucker

Reactions: long_time_Dish, sdfntx, dishstaller and 1 other person

dishstaller

Today at 12:33 PM

Can't You See - Marshall Tucker Band

Reactions: long_time_Dish and sdfntx

sdfntx

Today at 2:42 PM

See You in September - The Happenings

long_time_Dish

Today at 4:17 PM

You Look Like You Love Me - Ella Langley

View all replies (68525)

meStevo

Lifetime Supporter

Last reply Today at 3:59 PM · posted in The Sports Section

NFL 2026-2027 Season

Schedule drops tomorrow. Mandatory mini camps in June. Hall of Fame game August 6th.

111 Replies · 1706 views

Load Replies (111) Reply Legacy View

Reactions: Jimbo and dfergie

osu1991

Thursday at 5:17 PM

Troy Aikman seems to confirm he'll be leaving ESPN

Aikman says he looks forward to "where my next landing spot will be."

www.nbcsports.com

Reactions: Mike0616

Mike0616

Thursday at 5:30 PM

osu1991 said:
Troy Aikman seems to confirm he'll be leaving ESPN

Aikman says he looks forward to "where my next landing spot will be."

www.nbcsports.com

Hopefully nowhere near a microphone.

Yespage

Friday at 11:03 AM

Mike0616 said:
Hopefully nowhere near a microphone.

After having experienced Gus Ferguson trying to call soccer games, I'm uncertain why NFL football analysts get hate. Even the "worst" of them are pretty good.

meStevo

Friday at 12:05 PM

Jalen Hurts out indefinitely as they treat and monitor a superficial blood clot in his leg.

View: https://x.com/RapSheet/status/2111074303185989663?s=20

Reactions: Mike0616 and Foxbat

meStevo

Today at 3:59 PM

Browns lead the AFC North

Seth Meyers What GIF by Late Night with Seth Meyers

Reactions: Mike0616

View all replies (111)

TVHabit

Last reply Today at 3:38 PM · posted in Free To Air (FTA) Discussion

Hybrid Dish setup

Picked up a sweet directv dish, mount, twin lnbs and a short cable.
Has anyone converted one to FTA? A Frankenstein of sorts...

5 Replies · 152 views

Load Replies (5) Reply Legacy View

Titanium

Tuesday at 5:10 PM

Yes, many have hacked a DirecTV or Dish Network dish before. Quite undersized, but would receive the 97w KU stations with an LNBF swap. Make a template to set the LNBF face angle and distance from the reflector. Remove the current circular polarity LNBFs and make a bracket to hold the replacement linear LNBF in the correct centered position. Remember to set the polarity skew.

Reactions: TVHabit and FTA4PA

Brct203

Tuesday at 9:07 PM

would probably also work well for NHK on 101W and possibly for PBS on 99W. I used one for a while on 30W. Just keep in mind that because it's undersized for those satellites, it might work fine in clear weather but won't have much margin to account for signal degradation during rain/snow

Reactions: TVHabit

one_db_compression

Tuesday at 10:22 PM

If you can find one, the Shaw / Star Choice 75e ellipticals are great for use on 97, 99, and 101W. They are really just rebranded ChannelMaster 75 cm reflectors and use linear LNBFs by default out of the box.

Everyone else's mileage may vary.

Reactions: TVHabit

TVHabit

Today at 10:12 AM

I have read that some have converted this type dish but after giving it a good look, it's the lnb conversion that is the bottleneck. Does anyone have a picture of their attempt to configure the lnb? I watched a video on youtube from the save it for parts guy and he used duct tape! Guess it worked but I'm thinking something a bit more permanent!
Thanks to all for your interest and replies...

Titanium

Today at 3:38 PM

Many of us have used a universal LNBF mount (or get creative with L brackets and plumbers tape - perforated metal strapping). Use a few inches of aluminum tube (or a piece of 1x2" lumber) to extend the support arm (replacing the plastic mount used by DirecTV and Dish) to place the LNBF throat opening at the correct distance from the reflector, the correct height and at the correct angle. Nothing magical... simply place the new linear LNBF in the center at the same distance, height and angle as the current combo.
www.amazon.com/Universal-Single-Bracket-Holder-FTA-US/dp/B074L85WK2

dfergie

Staff member HERE TO HELP YOU!

Last reply Today at 2:04 PM · posted in The Chit Chat Club

Gas Price Info With National Gas Temperature Map

Stumbled across this ... http://www.gaspricewatch.com/USGas_ZipSearch.asp
I found no local prices, although it did show stations at my location...
Added these to this post...
USA National Gas Temperature Map
State By State Gasoline Taxes
Gas Buddy

Ethanol Free Stations

5550 Replies · 460542 views

Load Replies (5550) Reply Legacy View

Bobby

Thursday at 11:20 AM

Regular$6.099
Premium$6.599
Diesel$7.999
at Costco, Rohnert Park.

Bobby

Today at 10:27 AM

Regular$5.999
Premium$6.399
Diesel$7.999
at Costco, Rohnert Park.

Reactions: harshness

harshness

Today at 11:30 AM

I wonder if California is getting into the Winter formula.

dishstaller

Today at 12:32 PM

Bobby said:
Regular$5.999
Premium$6.399

Odd that out there, Prem is only 40 cents higher. Here it's a full dollar more.

Last night it was about $4.17 gas, $6,19 diesel.

harshness

Today at 2:04 PM

dishstaller said:
Odd that out there, Prem is only 40 cents higher. Here it's a full dollar more.

On the West Coast, a 40-cent differential is common. It used to be 30 cents before the prices rose above $3.

A "full dollar more" sounds like it may be boat gas (non-alcoholic), which is a whole different discussion.

View all replies (5550)

klang

Pub Member / Supporter Lifetime Supporter

Last reply Today at 2:00 PM · posted in TV Shows

Star Trek: Starfleet Academy - Paramount+

Season 2 order already in hand:

'Star Trek: Starfleet Academy' Renewed for Season 2, Tatiana Maslany to Guest Star in Season 1

I've not been optimistic about this show based on what I've read so far. Seems to be aimed at a younger audience. Interesting though that Tatiana Maslany will have some sort of role.

80 Replies · 3166 views

Load Replies (80) Reply Legacy View

Reactions: MikeD-C05, TheKrell and Foxbat

klang

Jul 28, 2025

I'm sure I will watch at least the first episode but I am not optimistic.

Reactions: MikeD-C05, Keith Brannen, long_time_Dish and 1 other person

klang

Oct 11, 2026

klang said:
I'm sure I will watch at least the first episode but I am not optimistic.

Here i am over a year later and just finished season 1. Not great but not as bad as I was expecting. Did not care for the barefoot captain stuff but overall ok. Actually looking forward to see what they did for season 2.

Reactions: MikeD-C05

MikeD-C05

Oct 11, 2026

klang said:
Here i am over a year later and just finished season 1. Not great but not as bad as I was expecting. Did not care for the barefoot captain stuff but overall ok. Actually looking forward to see what they did for season 2.

Yeah, the foot stuff was just nasty. I kept thinking of how dirty her feet would get traipsing around shoe-less. Funny, I love being shoe less at home and never wear shoes indoors in my home for long, but seeing her laying on all her furniture with her bare feet hanging out just kind of grossed me out.

Reactions: long_time_Dish

harshness

Tuesday at 11:28 AM

MikeD-C05 said:
I kept thinking of how dirty her feet would get traipsing around shoe-less.

Where would this "dirt" come from? Dead skin and dandruff?

MikeD-C05

Today at 12:51 PM

harshness said:
Where would this "dirt" come from? Dead skin and dandruff?

There would still be dirt ,dust in the future I am sure. So walking around the station like she did she would get stuff on her feet. I am sure the robot vacuum is still going to miss stuff, with all those different alien species running around there.

Reactions: long_time_Dish

harshness

Today at 2:00 PM

MikeD-C05 said:
There would still be dirt ,dust in the future I am sure.

Where is it going to come from -- specifically?

Why do you think cleaning technology won't improve in the next few hundred years? HEPA filtration was invented as part of the Manhattan Project.

View all replies (80)

JohnGalt1234

Last reply Today at 1:49 PM · posted in DISH Network Support Forum

H3 EHD lists upcoming airings instead of recordings on EHD and often won't recognize EHD is connected after reboot

This started a couple months ago. I have 2 H3s on one network, both with 2 EHD identical 3 TB seperately powered so all recordings are accessible by all 4k & J4s (8 of them).

On one H3 (not the main one that controls the MOCA network), after it reboots, it doesn't recognize it has two EHDs plugged into it. Rebooting the EHD by their power source doesn't fix it. Resetting the network doesn't. Software h3 reset doesn't fix it. Rebooting MOCA h3 doesn't fix it but so far, after 3+ cold boots (unplug pwr to H3 with unrecognized EHDs), it finally it figures out they are plugged into it. BUT.... Then when you open a program it only partially shows series and episodes, but instead of showing recordings, it only shows upcoming airings. HELP!!!!

25 Replies · 434 views

Load Replies (25) Reply Legacy View

navychop

Yesterday at 3:40 PM

It'll only see two EHDs at a time.

Reactions: Bobby and charlesrshell

Almighty1

Yesterday at 7:18 PM

JohnGalt1234 - So you basically have 2 Hopper 3's. The CasinoH3 is the one that is Hopper 3 only while Master Bedroom is a Hopper 3 with Hopper Plus setup.
Master Bedroom uses Android TV (ATV) software so the DISH part is actually a app and will behave differently as you can probably tell the Guide's are different on the Master Bedroom which will resemble the same guide used on other ATV devices such as the Joey 4 and Wireless Joey 4. If I am correct, the CasinoH3 is the one with the problem since you did say the one dated 09/05/2026 is the naughty one while 08/15/2026 named Master Bedroom is the nice one. Usually I would expect the CasinoH3 to be the one without the problem because it's Hopper 3 only and Master Bedroom would be the one with problems because it has the Hopper Plus involved. That is why they behave differently because CasinoH3 is running the native Hopper 3 software while Master Bedroom is running the Android TV software and also it runs a app called DISH known as package com.dish.atv.launcher, the version for mines is P15403 2026100917 so it's probably the same version as the Hopper Plus software version with the date of October 9, 2026, not sure what the 17 means except maybe revision 17?

This explains it better than I can. Sorry, had to take all the ads out.

Reactions: charlesrshell

JohnGalt1234

Yesterday at 9:02 PM

Almighty1 said:
JohnGalt1234 - So you basically have 2 Hopper 3's. The CasinoH3 is the one that is Hopper 3 only while Master Bedroom is a Hopper 3 with Hopper Plus setup.
Master Bedroom uses Android TV (ATV) software so the DISH part is actually a app and will behave differently as you can probably tell the Guide's are different on the Master Bedroom which will resemble the same guide used on other ATV devices such as the Joey 4 and Wireless Joey 4. If I am correct, the CasinoH3 is the one with the problem since you did say the one dated 09/05/2026 is the naughty one while 08/15/2026 named Master Bedroom is the nice one. Usually I would expect the CasinoH3 to be the one without the problem because it's Hopper 3 only and Master Bedroom would be the one with problems because it has the Hopper Plus involved. That is why they behave differently because CasinoH3 is running the native Hopper 3 software while Master Bedroom is running the Android TV software and also it runs a app called DISH known as package com.dish.atv.launcher, the version for mines is P15403 2026100917 so it's probably the same version as the Hopper Plus software version with the date of October 9, 2026, not sure what the 17 means except maybe revision 17?

This explains it better than I can. Sorry, had to take all the ads out.

View attachment 194857

As I understand it, the android is just the display signal from the hopper+. I can disconnect the H+ and plug the hdmi directly into the master hopper3.

Reactions: charlesrshell

Almighty1

Today at 12:02 AM

JohnGalt1234 said:
As I understand it, the android is just the display signal from the hopper+. I can disconnect the H+ and plug the hdmi directly into the master hopper3.

It is not just a display signal as explained above. When you have the Hopper+ connected, it uses Android TV for pretty much everything except for the satellite signal which is why it uses the DISH app for the standard Hopper 3 functions. But that should not matter because in your case, CasinoH3 is the Hopper 3 with the EHD which is what you call the naughty one based on the dates you mentioned and Master Bedroom which has the Hopper Plus connected to the Hopper 3 that does not have the problem. So one way to test the theory is disconnect the Hopper Plus from that Hopper 3 and then use the EHD's connected to CasinoH3 currently to see if the same issue exists. That way you will know if the problem is there without a Hopper Plus connected or if CasinoH3 is just a bad hopper to begin with.

Normally when you disconnect the Hopper Plus, it will be 30 minutes or more before you can use the Hopper 3 again.

What you want to do is:
hold the POWER button in, not the red reset button, for about 45 seconds or so while disconnecting the power to the Plus and moving the HDMI cable and it will reboot to the normal Hopper only immediately.

Reactions: charlesrshell

bookworm370

Today at 1:41 PM

navychop said:
It'll only see two EHDs at a time.

Yes, I have only two online at a time.
One comes online, the other one consistently will not come online

Reactions: charlesrshell

bookworm370

Today at 1:49 PM

bookworm370 said:
Yes, I have only two online at a time.
One comes online; the other consistently won't. Also, when I connect the EHD, the USB Detected status light on the EHD itself changes from Red to Green. But the Hopper (713) does not start the EHD read process. The light changes to indicate that the EHD has detected a valid USB cable, but the Hopper does not recognize it.

View all replies (25)

iJustine

Today at 1:12 PM · posted in iJustine

Microsoft Surface ultra unboxing

Time for another AWESOME video from iJustine!

View: https://www.youtube.com/shorts/uJiZVGQC3Gc

Direct YouTube Link - Microsoft Surface ultra unboxing
The official iJustine Website's Website
Buy her book!