Hi, folks! I searched the threads and I have seen a number of reports of the 622 not having any HDMI output, since this is my current dilemma as well. But I could not see in any of those threads that anyone ever found a solution. Is there anything I should try before I call E* tech service (again!) for a swap?
The HDMI/HDMI cable was tested in another system at BB and seems to work OK. I have not tried another cable yet as I don't have one and I'm not inclined to pony-up at least $50 to a local store for just an experiment, especially given the fact that the one I have is proven OK in another system.
TV = Sony Bravia. HDMI/DVI from 811 works OK, but not the HDMI/HDMI from the 622. The composite and component connections from the 622 to the TV work and everything else I have tested on the 622 so far works OK (except for perhaps the 622's OTA tuner, but that's a topic for another thread!). I did try several HDTV set-up options (menu - 6 - 8 screen). The Sony supports both 720p and 1080i. 622 SW = 3.56 (I think).
Any thoughts/other experiences would be appreciated! TIA and BRgds...
The HDMI/HDMI cable was tested in another system at BB and seems to work OK. I have not tried another cable yet as I don't have one and I'm not inclined to pony-up at least $50 to a local store for just an experiment, especially given the fact that the one I have is proven OK in another system.
TV = Sony Bravia. HDMI/DVI from 811 works OK, but not the HDMI/HDMI from the 622. The composite and component connections from the 622 to the TV work and everything else I have tested on the 622 so far works OK (except for perhaps the 622's OTA tuner, but that's a topic for another thread!). I did try several HDTV set-up options (menu - 6 - 8 screen). The Sony supports both 720p and 1080i. 622 SW = 3.56 (I think).
Any thoughts/other experiences would be appreciated! TIA and BRgds...