Read over at satforums that it is an issue, and counts over 4800 are causing guys to have to do a master reset to get there receivers working good.
Read this and try it if it don't work do a MR. 4DTV Online... Final Work Around Instructions
Some receivers take the update with over 4800 channels some don't. If it don't take the hits you just give up and loose nothing except subs. Thank NPS and Charlie that now we have to bust our humps and make 4Play work just to get the maps back that GI/Motorola should have loaded from the factory. If I have it my way I will get the last laugh
I got a 410 to sub and my 920 will stay the way it is. Like lonegunman I'm not losing the maps. This box has not needed a MR since the first one back when I set it up years ago so I don’t forsee it needing one anytime soon.
So if the generics will be gone then there ain't gonna be no MR at my house and if there's a chance they will be lost then I ain't gonna even try. I've lived the last 3 months with NO sub and found that life goes on without one. ;-)
Lone Gunman said:There has been only 1 (one) MR on my 920 since I bought it new and that was a couple of years ago to get the W5 tile when my TDT count was at 1920, which I apparently can thank A1/2 for? It's at 1714 now so I don't see that being a problem any time soon as I don't have any of the A tiles programmed in. And even if it was at 1920, at this point I wouldn't be any worse off than I am now.
FTA and OTA are doing fine at my house so I'll stick with those and whatever the 920 offers up through generics will just be a plus. ;-)
start at square one. do you have the x4 tile ? the issues are more with mapping x4 then switching emm providers. if you have x4, are your dmx channels in the 800's or 900's ?
crackt out,.
There has been only 1 (one) MR on my 920 since I bought it new and that was a couple of years ago to get the W5 tile when my TDT count was at 1920, which I apparently can thank A1/2 for? It's at 1714 now so I don't see that being a problem any time soon as I don't have any of the A tiles programmed in. And even if it was at 1920, at this point I wouldn't be any worse off than I am now.
FTA and OTA are doing fine at my house so I'll stick with those and whatever the 920 offers up through generics will just be a plus. ;-)
What cause the TDT to increase as a reference was made in the quoted post to A tiles? Does it increase depending to which tiles you have selected?
Thanks,
Candid
When I couldn't get W5 a couple of years back I was told that the 1920 max memory thingie was due to the fact that I had either the A or E tiles programmed (think it was the As) and that those sats would max the memory on the 4D units. Since then I've stayed away from anything associated with Canadian TV. Maybe someone can elaborate on this but until I get some "real" confirmation that this won't happen again then I'm not going to setup any A tiles especially since I can' t speak French!
But in reality I guess much of this is moot point as I'm going to order another Vbox X and DMX 741 from Leomall and just convert my 10ft Winegard to LNBF to see how it does with my new AZ Ultra. The 920 in question will go on the shelf until someone comes up with a true "fix" for all the woes that have been posted about high post counts, etc. I've got a 12ft Conifer and a 6ft Janiel Jr that I plan to mount this spring so the 920 "might" get connected to one of those.
Lone Gunman out!
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?