I have a Dish DVR 625 connected to 2 tvs. I would like to connect a 3rd tv to the receiver (I know it will receive the same programming as one of the other tvs). How do I go about doing this? My house is wired for cable, but when I tried connecting the cable to the tv, there was no signal. So, I'm probably missing something.
Add 3rd tv to receiver
- Thread starter bodinsmom
- Start date
- Latest activity Latest activity:
- Replies 2
- Views 2K
-
WELCOME TO THE NEW SERVER!
If you are seeing this you are on our new server WELCOME HOME!
While the new server is online Scott is still working on the backend including the cachine. But the site is usable while the work is being completes!
Thank you for your patience and again WELCOME HOME!
CLICK THE X IN THE TOP RIGHT CORNER OF THE BOX TO DISMISS THIS MESSAGE
Did you split the signal? Which tuner are you splitting? Sharing the signal of #2 will allow you to take the uhf remote to the tv. But you will have to use a splitter to feed your existing tv and your new tv you are adding
As long as that cable is originating from the 625 it should work the same as the other 2 TVs. Basically you are splitting the signal to 3 TVs. You may have to do a channel scan on the TV.
