I just changed to an Apple Airport wireless router and my HR-21 can't see it. I went to the advance setup but have no idea what to input. It worked fine with my Linksys but the wife has two Mac's and they didn't work well with the Linksys. D* says they only help if I buy a Powerline device for $100. Any suggestions.
Apple Airport Help
- Thread starter bluezbear
- Start date
- Latest activity Latest activity:
- Replies 3
- Views 2K
-
WELCOME TO THE NEW SERVER!
If you are seeing this you are on our new server WELCOME HOME!
While the new server is online Scott is still working on the backend including the cachine. But the site is usable while the work is being completes!
Thank you for your patience and again WELCOME HOME!
CLICK THE X IN THE TOP RIGHT CORNER OF THE BOX TO DISMISS THIS MESSAGE
- Status
Apple
I have an HR20. The Apple Airport Extreme Base Station connected to Verizon DSL.
I then have an Apple Wireless Airport that sees the AEBS.
In the HR20 setup you need to make sure the DNS setting is right or you waon't connect to the internet. I have put the Verizon DNS settings (71.243.0.12) as the DNS Server address.
If you run the system test on the HR 20 you can see if it is connected to the network, then connected to the internet.
I have a Mac Mini and it connected via wire to an Linksys 4 port DSL/Cable router before I went all Apple.
I have an HR20. The Apple Airport Extreme Base Station connected to Verizon DSL.
I then have an Apple Wireless Airport that sees the AEBS.
In the HR20 setup you need to make sure the DNS setting is right or you waon't connect to the internet. I have put the Verizon DNS settings (71.243.0.12) as the DNS Server address.
If you run the system test on the HR 20 you can see if it is connected to the network, then connected to the internet.
I have a Mac Mini and it connected via wire to an Linksys 4 port DSL/Cable router before I went all Apple.
- Status
