AzBox miniMe

[bobsav2001]

Hi all
I have ordered a AzBox miniMe, will i be able to pickup the Florida channel DVB S2 8PSK on SES2 at 87 West,
and the Canadian feeds 4.2.2 on Anik at 107.3 West?
Dish is Fortec Star 90 cm....


Thanks for the info....

 

[Lak7]

Can you currently lock those transponders?

 

[bobsav2001]

I can lock them all on 107 and 87 but not the Florida ch.

 

[Lak7]

What receiver are you using now?

 

[FaT Air]

Conditions have to be few clouds, low humidity, light winds for Florida Ch reception here. Got it now at Q bouncing around 0 to 20 but not breaking up on the 30 inch 'POD'. Was weakest of all transponders @87W even when I pointed a 1.2 meter at it.

 

[SatPhreak]

I couldn't lock Florida Channel until I switched to a pll lnbf on my 90cm dish.

 

[bobsav2001]

I am now using a Ariza 700 not modified and works great on all sats.

 

[Lak7]

See if you can lock the 12009.
The AzBox is a DVB-S2, and can tune the Florida TP, so it comes down to your location and other hardware.

 

[bobsav2001]

I have no problem locking 12009 KTEL Telemundo.

 

[Lak7]

You might be in good shape, but DVB-S2 is a little tougher though.

 

[bobsav2001]

Thanks for the help.
As long i can get my Canadian feeds i will be happy.
By the way what do they air on the Florida ch?
Thanks again Bob VE2 FCZ....

 

[FaT Air]

By the way what do they air on the Florida ch?

State Legislative Ch.

 

[pwrsurge]

Hi all
I have ordered a AzBox miniMe, will i be able to pickup the Florida channel DVB S2 8PSK on SES2 at 87 West,
and the Canadian feeds 4.2.2 on Anik at 107.3 West?
Dish is Fortec Star 90 cm....


Thanks for the info....

Yes, you will be able to receive both the Florida Channel and the Canadian CBC news 4.2.2 feeds with this receiver. The AzBox miniMe American Edition firmware already includes all the transponders pre-programmed for these services so you will simply have to do an automatic satellite scan on SES 2 @ 87W and Anik F1R @ 107.3W.