Which sat am i suppose to cover first? I believe i need to lock on to 119 first by covering 110. I just put a new pole for my sats and now I can't seem to find the signal for the 110/119. any advice?
can't find 110/119 sats
- Thread starter AppliedAggression
- Start date
- Latest activity Latest activity:
- Replies 1
- Views 3K
-
WELCOME TO THE NEW SERVER!
If you are seeing this you are on our new server WELCOME HOME!
While the new server is online Scott is still working on the backend including the cachine. But the site is usable while the work is being completes!
Thank you for your patience and again WELCOME HOME!
CLICK THE X IN THE TOP RIGHT CORNER OF THE BOX TO DISMISS THIS MESSAGE
I didn't bother covering the other LNB head. If you end up pointing the 119 head at 110 the pointing display will tell you, with the "Wrong Sat" warning.
Check your numbers. Don't adjust for magnetic north if you are using a compass as the azimuth given is magnetic. Set the point the screen on 119, TP11 works nice. Sweep slowly until you get a bird. If you get 110 Wrong Sat turn it a little more.
I'm assuming that this being a reinstall your receiver already knows which LNB head to use to pull 119. Unless you did a check switch while the 110 head was pointing at 119 you should be OK.
JL
Check your numbers. Don't adjust for magnetic north if you are using a compass as the azimuth given is magnetic. Set the point the screen on 119, TP11 works nice. Sweep slowly until you get a bird. If you get 110 Wrong Sat turn it a little more.
I'm assuming that this being a reinstall your receiver already knows which LNB head to use to pull 119. Unless you did a check switch while the 110 head was pointing at 119 you should be OK.
JL
