OTHER Channel Master original Feedhorn

teltras

New Member
Original poster
Aug 18, 2022
3
1
Pt
I just got this part today, is this good to go on a Channel Master 1.2m? It´s a very big feedhorn, a lot bigger than my other feedhorn from my other channel master.

The part number on it it´s 3041107 any info on this?

This come with 1watt buc and rejection filter plus a JRC lnb, one polarization only.

Thanks

Channelmaster-feed.jpg
 
  • Like
Reactions: SDA_FL_USA
I dont have horizon for those satellites, I´m in Europe i can only do like 82W to 68E

But when you say signals could be better could be the LNB or the feed? Maybe the culprit its on LNB side.?


Thanks
 
I dont have horizon for those satellites, I´m in Europe i can only do like 82W to 68E

But when you say signals could be better could be the LNB or the feed? Maybe the culprit its on LNB side.?


Thanks
I'm not sure could be the lnb but I haven't tried another type. The dish was original an rx/tx with the buck and single polarity lnb. I just use it as a fixed dish on one satellite. All the adjustments are rusted again. It pulls in signals ok that I watch and most wild feeds that pop up on that satellite 103w KU.
 
  • Like
Reactions: teltras
***

Users Who Are Viewing This Thread (Total: 1, Members: 0, Guests: 1)