I just added a Dish 500 tuned to 129 and connected it to my 1000.2 via the external input port 4. After the Check Switch test, it still doesn't acknowledge anything on this port. The Details section says "No Signal Port4 External LNB input".
I covered the 129 LNB on the 1000.2, but still don't get my 129.
Any ideas on how to enable or identify the activity on this port to the receiver?
An aside.... my dumba$$ installer had difficulty tuning my system for all 3 birds, and I now know why...he put a nice dent in the dish just off of the center. I did some work on it with my autobody dollies, and increased my SS a bit, but I think this dish is screwed.
I covered the 129 LNB on the 1000.2, but still don't get my 129.
Any ideas on how to enable or identify the activity on this port to the receiver?
An aside.... my dumba$$ installer had difficulty tuning my system for all 3 birds, and I now know why...he put a nice dent in the dish just off of the center. I did some work on it with my autobody dollies, and increased my SS a bit, but I think this dish is screwed.