Ok, for some reason since loading the new firmware (just before the very last "tightened-up" firmware), my MicroHD is losing time on it's clock. I have it set to local time, UTC OFF. I never turn it off, or allow it to go to sleep. It loses about 15-20 seconds over the period of 1 week or so. This eventually throws off my dvr recordings, and probably would get worse and worse if I didn't sync it every week. It's typically parked on Metv or Cozi as it's home position.
I never had to do this until this latest firmware, since I started leaving it on permanently. Any ideas what could cause this? It is plugged into a 6-way ext. cord, which is plugged into a UPS. Nothing changed (that I know of) in between before time starting slipping and now, with the exception of the new firmware load.
I never had to do this until this latest firmware, since I started leaving it on permanently. Any ideas what could cause this? It is plugged into a 6-way ext. cord, which is plugged into a UPS. Nothing changed (that I know of) in between before time starting slipping and now, with the exception of the new firmware load.
