I currently have E* and am considering a switch to D*. I have an old dish500 and a dual LNB. I want to use this dish at the other end of my house for SD ONLY because I don't want to have to run a long coax cable from the new D* slimline dish with 5 LNBs. Can the dish and LNB be used with a D* standard definition receiver if I install it and aim it at the D* satellites? Are the basic dish and LNB compatible for both services or is special hardware needed?
Compatibility of D*/E* Dish/LNB
- Thread starter richiephx
- Start date
- Latest activity Latest activity:
- Replies 4
- Views 1K
- Status
A dish 300 or 500 (single or dual LNB) (with the appropriate STB) will work with D* as is, you'd want to aim for D*'s 101.
Do you mean SW-21 switch? And don't even think about a "TWIN" LNB it has a built in switch that isn't compatible.
A dual Legacy lnb from Dish Network is compatible with Directv but it must be Legacy and not Dish Pro. You could probably just be able to get 101 but that's where the majority of the SD programming comes from.
- Status
Similar threads
