Since you're only getting 110, I'm thinking that your dish is pointed too far West. Try moving it 10 degrees back East, and see if 119 pops in, along with 110.
Alright, We're getting somewhere... move it over and get a strong reading on 110 and 119 and get all the channels possible... BUT still no local channels and it isn't appearing in the check switch... so something is up.
EDIT: I now can view the 129 satellite in Point Dish and I have strong strength... It's just not acknowledging my LNB...
Alright, I have everything working now guys... I had to disconnect the cable to the reciever and run a checkswitch, then reconnect the cable and run a checkswitch in order for it to find the 129 LNB.
But NOW I have good strength on all 3 Satellites and receive all the channels EXCEPT the local one he should be getting...