I'm looking to get a DISH 921 receiver in the future, but wanted to understand what configuration of dish, LNBs, switches, coax runs, etc. would be required to provide HD programming to a dual tuner 921 receiver and regular programming to another non-HD single tuner receiver.
I believe my current configuration is a DISH 500 with two dual LNBs (one for 110 / one for 119) and two 21 switches to support two receivers.
From what I understand, DISH HD programming along with regular programming is coming off of Sats 110 and 119. Therefore, I don't think I need second dish, but I'm not sure. Or do I need to replace the DISH 500 with a SuperDish?
Also, to get the three outputs to support three tuners (2 for 921 receiver / 1 for single tuner receiver), I believe the best configuration is to replace my current config with a Quad DishPro LNB with three coax runs or use a Twin DishPro LNB with some type of switch to support three tuner inputs. Is this correct?
I believe my current configuration is a DISH 500 with two dual LNBs (one for 110 / one for 119) and two 21 switches to support two receivers.
From what I understand, DISH HD programming along with regular programming is coming off of Sats 110 and 119. Therefore, I don't think I need second dish, but I'm not sure. Or do I need to replace the DISH 500 with a SuperDish?
Also, to get the three outputs to support three tuners (2 for 921 receiver / 1 for single tuner receiver), I believe the best configuration is to replace my current config with a Quad DishPro LNB with three coax runs or use a Twin DishPro LNB with some type of switch to support three tuner inputs. Is this correct?