I'm ready to jump off the roof of my house guys. After spending quite a bit of time getting my roof mount perfectly plumb I go to install my Stab HH90 onto my dish only to find out they are incompatible. The motor tube hits the back of the Winegard DS2076 making any elevation change impossible unless your dish elevation is 20 degrees. I need to pick out a new dish unless some of you veterans know of a modification I can make to install it? I measured from the bottom of the motor where the tube connects and its approx 25" to the roof line. What size of dish could I get away with that would work? Keep in mind the Stab HH90 only supports up to 95cm. Thanks for any help.