Does anyone have a CaptiveWorks CW-800S Manual?

[YoderIII]

I need a CaptiveWorks CW-800S manual. I emailed CaptiveWorks but so far no answer. A google search gave a little. Can anyone help? Thanks.

 

[willie8605]

After reading your other post, I did some Googling and found very little, just someone's typed up version of a manual. I emailed them as well about half an hour ago. If you find one, be sure to get it uploaded into the "FTA Manuals" section so everyone will have access to it.

 

[jrturbo]

i have one, what you need from it?

 

[YoderIII]

Can you email me a complete copy? I know very little about the receiver. Thanks!!

 

[Mr Tony]

removed e-mail address. Best to send the person a PM with the e-mail address

PLEASE LOG IN TO GET RID OF THESE ADS!

 

[jrturbo]

sure, PM me your email.

 

[carlospr43]

Can you send me a copy , I have a CW800 as well and need a copy of the manual, Thanks

 

[carlospr43]

i have one, what you need from it?

jrturbo or YoderIII
If you around or anyone who may have a copy of the captivework 800 manual I'll appreciate if you can post in the download section or by PM. Thank you

 

[ftageekyyc]

'evening,

This is kind of a zombie thread but I thought I would ask the question.

I acquired a Captiveworks 800s as part of a used deal with a dish and motor. I don't really expect to use the receiver given the other collection of hardware I have but while checking to see if I had the latest factory firmware I noticed there does not seem to be a manual for this box on the site.

I know it is old and moldy (the receiver that is, not the manual) but if there is still interest in posting the manual I will scan it.

 

[Hockeynut]

'evening,

This is kind of a zombie thread but I thought I would ask the question.

I acquired a Captiveworks 800s as part of a used deal with a dish and motor. I don't really expect to use the receiver given the other collection of hardware I have but while checking to see if I had the latest factory firmware I noticed there does not seem to be a manual for this box on the site.

I know it is old and moldy (the receiver that is, not the manual) but if there is still interest in posting the manual I will scan it.

I can`t imagine there would be any interest in a manual for that receiver.It is really useless for FTA.So limited!..Hope you picked up a good motor and dish out of the deal.

PLEASE LOG IN TO GET RID OF THESE ADS!

 

[ftageekyyc]

Yep, bought the package for the motor.

 

[carlospr43]

Hello,
I have the CW800 in PDF format. Send me a PM with your e-mail so I can send you a copy, regards