Is this the missing piece to allow H3 and international channels?
Yes it is. Just PM MattGIs this the missing piece to allow H3 and international channels?
Is the cost to buy one known yet?
Thanks JSheridan.Here's the DPH42 Installation Guide:
And before anybody asks, I don't know when the 'Wally Network' is going to be supported.
Is Dish allowing mixed Hopper, VIP, Wally installations? (with the DPH42)
Reading that manual it appears that I am going to have to replace the Hybrid LNB's with the old ones to add a second Hopper 3. Is this correct?Here's the DPH42 Installation Guide:
Reading that manual it appears that I am going to have to replace the Hybrid LNB's with the old ones to add a second Hopper 3. Is this correct?
Thanks,
D. Simmons
AFAIK It's still the same. Up to 2 purchased 211's with Hoppers. Not sure if they allow Wally's with Hoppers yet.
You can have Wallys activated with Hoppers. I have a Wally and a 211K that I had activated previously, before I got a second Hopper 3.
Of course, with the two Hopper 3's I no longer need the Wally/211K setup, and would have to keep two separate dishes anyway. I believe that the DPH42 maxes out at 32 tuners, I "think."
Wouldn’t it be 64 because it supports 2 H3?
Each Hopper 3 is 16 tuners, so 2 x 16 = 32.
(Whether thats actually a real or theoretical limit of the DPH42, I haven't a clue)
Not a bad cost since it costs $50+ just for a DPH LNBF head to change a Winegard Trav'ler to work with a Hopper 3.
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?