I recently purchased a Dish Pro Plus 1000.2 LNBF and a VIP211K HD tuner as the only tuner in the set up. I was going to set it up myself as being there for the installer is not very easy for me. The directions are pretty straight foreward but I can't quite figure what type of switch (dpp44, expensive!) if any is necessary ( I have a meter and can make the cable connections). Any input would be much appreciated> This is my first post so please bear with me. Thanks.
DPP 1000.2 LNBF with multiswitch
- Thread starter 56downsouth
- Start date
- Latest activity Latest activity:
- Replies 3
- Views 2K
-
WELCOME TO THE NEW SERVER!
If you are seeing this you are on our new server WELCOME HOME!
While the new server is online Scott is still working on the backend including the cachine. But the site is usable while the work is being completes!
Thank you for your patience and again WELCOME HOME!
CLICK THE X IN THE TOP RIGHT CORNER OF THE BOX TO DISMISS THIS MESSAGE
Switch should be built into the lnb, unless you are adding three or more receivers, you will not need an external switch.
I take it you have the dish that the LNBF goes on, right? You don't need a switch - it is built in to the LNB.
thanks for the reply. I guess the local retailer was trying to sell the expensive switch. thanks again
