DPP44 Power Inserter

[tstolze]

I currently have a 622 upstairs and a 722 downstairs, the power inserter is with the 722. I am going to move the 722 to my upstairs location and cancel the 622. I just want to make sure it's alright to leave the power inserter in the current location with no receiver connected to it. Thanks!

 

[gdarwin]

Yes, that will work.

 

[Jerryinvirginia]

Where is the power inserter currently located?

 

[gdarwin]

downstairs....

 

[Jerryinvirginia]

Reviewing the installation manual for the DPP44 shows the RG-6 cable from the seperator passes thru the inserter from the host receiver and is connected to port 1 of the receiver outputs at the switch. Don't see where it's recommended to be operational in other ways????? Would be interested in other connection options.

 

[tstolze]

Thanks for the quick reply!

I have the 722 moved and working as it should upstairs. Hooked it to the lcd with component cables.

I still have to route the hdmi cable to the theatre room downstairs in then morning, then the project will be finished.