dpptwin problems

[dnsguy]

anyone noticing a lot of dpp twins failing lately. Mine just did. I'm only getting 119 no 110 and no spotbeam.

 

[dirkleearm]

Lots of people are having heat related failure of the dpp twins across the country.

 

[Liquidforce88]

Are you getting a check switch with just 119 N.C. on a dual tuner? If so I have a way to fix it.

 

[rcdallas]

anyone noticing a lot of dpp twins failing lately. Mine just did. I'm only getting 119 no 110 and no spotbeam.

I've been replacing quite a few Superdish LNBs lately.

 

[rcdallas]

Are you getting a check switch with just 119 N.C. on a dual tuner? If so I have a way to fix it.

How do you fix it? This the aluminum foil trick?

 

[Liquidforce88]

Nope clear the matrix by running a check switch with the line in disconected. Then check the superdish option and run a check switch agian.

We have been getting a lot of service and trouble calls for this.

 

[Stargazer]

There seems to be a lot of issues with all of the SuperDish lnbf's due to heat here lately. I have seen failures with all of the lnbf's now.

 

[rcdallas]

Nope clear the matrix by running a check switch with the line in disconected. Then check the superdish option and run a check switch agian.

We have been getting a lot of service and trouble calls for this.

This applies to DPP Twins or the Superdish LNBs for the matrix?

Side note:

It makes sense. Lot #T605 DPP Twins that were going around last week not one of them would work with a 322 reman no matter what you would do.

Today I noticed a new shipment of DPP Twins, you'll know it when you see one, you really have to squeeze to get them into the Y bracket. I'm thinking these are probably designed for the heat related issues.

 

[Liquidforce88]

This applies to DPP Twins or the Superdish LNBs for the matrix?

Side note:

It makes sense. Lot #T605 DPP Twins that were going around last week not one of them would work with a 322 reman no matter what you would do.

Today I noticed a new shipment of DPP Twins, you'll know it when you see one, you really have to squeeze to get them into the Y bracket. I'm thinking these are probably designed for the heat related issues.

My fix is for when you get the 119 N.C. results on the DPP twin. This result is not a hardware issue, it's software.

 

[rich88]

This applies to DPP Twins or the Superdish LNBs for the matrix?

Side note:

It makes sense. Lot #T605 DPP Twins that were going around last week not one of them would work with a 322 reman no matter what you would do.

Today I noticed a new shipment of DPP Twins, you'll know it when you see one, you really have to squeeze to get them into the Y bracket. I'm thinking these are probably designed for the heat related issues.

Yep, I've notice the DP Quads are now that way too.

I just take a flat-head screwdriver and slip it in on the bottom side and slide the LNB on.

Sorta like you would use a shoehorn to slide on a tight shoe.