Error code 771 but we have signal? (1 Viewer)

Status
Please reply by conversation.

WalleyeGuy

Thread Starter
New Member
Jun 28, 2017
4
0
International Falls, mn
We have an older 3 lnb directv dish and box that came with it. The dish was moved and re-aimed and we get somewhere between 80-95% on 101 and 119 on the signal meters, yet still no picture. We get the higher signal on clearer days and lower on cloudy.

Is this enough signal strength? We are only subscribing to and getting SD.

What else could my problem be, besides the obvious ;-)

Any advice would be greatly appreciated.
 

raoul5788

Studebaker driver
Staff member
HERE TO HELP YOU!
Supporting Founder
Lifetime Supporter
Dec 28, 2004
30,441
14,096
Cheshire CT
If you have a picture, then the signals are high enough to get a picture. That doesn't mean they are as high as they should be. You should be getting mid to high 90s on 101. 119 has spot beams so only the one pointed at your area should have similar numbers. The signal shouldn't vary just because it's cloudy. Is the box authorized? If so, have you tried reauthorizing it through the Directv website?
 

Jimbo

SatelliteGuys Master
Lifetime Supporter
Jul 14, 2005
63,803
4,153
NW Ohio - Buckeye Country
If you have a picture, then the signals are high enough to get a picture. That doesn't mean they are as high as they should be. You should be getting mid to high 90s on 101. 119 has spot beams so only the one pointed at your area should have similar numbers. The signal shouldn't vary just because it's cloudy. Is the box authorized? If so, have you tried reauthorizing it through the Directv website?
OP said they get No picture.

It sounds like they are not actually on the 101 Sat.
 

raoul5788

Studebaker driver
Staff member
HERE TO HELP YOU!
Supporting Founder
Lifetime Supporter
Dec 28, 2004
30,441
14,096
Cheshire CT
They may be on the wrong sat jimbo. WalleyeGuy, what are your signal strength numbers on all of the transponders on 101?
 
Status
Please reply by conversation.

Users who are viewing this thread

Users Who Are Viewing This Thread (Total: 0, Members: 0, Guests: 0)

Latest posts

Top