Fortec Star Lifetime Classic NA Set up question

[iafirebuff]

OK, sorry to be a pain, but I was reading the online setup manual for the Fortec Lifetime Classic NA receiver, and was wondering, when I go to setup my dish, I am going to aim it for G10R, do I change the satellite name in the setup menu so that the receiver menu shows G10R? The instructions said to leave the setting where they are at, and that is a different satellite than what I want to view. Thanks for any help! I have set up numerous Dish and Directv systems over the years, so I am comfortable with the aiming, elevation and such. The outfit I ordered comes with a meter and a compass - I have never used one for satellite setups before, so am anxious to have more "toys" to play with

Larry

 

[Mr Tony]

The Fortec lists most (if not all) of the major satellites that we can get in North America (from Pas9 at 58 to Dish 148 at 148)

You just scroll down to the satellite and select it

see below picture

 

[iafirebuff]

THANKS! I figured that must be the case, but as usual, got ahead of myself and am already reading on the setup, and the system has not even shipped yet

Larry

 

[Sadoun]

Larry

Take a look at the instructions here http://sadoun.us/Sat/Products/Fortec-Star/Receivers/CLASSIC-Installation.htm

I found the CLASSIC NA to be one of the easiest receivers to setup and work with.

 

[iafirebuff]

Thanks! I will check it out.

Larry