on the switches, never unplug or connect them to cables when receiver is powered on!
Turn off the receiver by the rocker power switch, or pulling the power cord, not by just the remote.
To be sure, pulling the power cord is the best.
on the switches, never unplug or connect them to cables when receiver is powered on!
Well, you have two possiblities that is causing a weak signal. the dish elevation is incorrect, either to high or to low. A quick check to verify which way its off is by pulling gently down on the dish while watching the signal levels then adjust the dish accordingly.(towards the direction that gives the best signal) The other possibility is the azmuith is off, which is left to right movements. A quick check is using the fine tuning menu in the receivers menu positioner settings / USALS.