I used the screen to align the dish to the highest pitch of tone. When i went to align there was only the second tone heard when the quality was in the 75 90"s area on the next day . How would this be corrected I suspect software error the version I have is TDV10290-1-0-2-0 Is there a better version also blind scan is wacky missing certain freq that are not close together. How do you update software? as I have never done that yet.
GEOSATpro GEOSATpro signal screen tones messed up
- Thread starter frank90
- Start date
- Latest activity Latest activity:
- Replies 5
- Views 1K
-
WELCOME TO THE NEW SERVER!
If you are seeing this you are on our new server WELCOME HOME!
While the new server is online Scott is still working on the backend including the cachine. But the site is usable while the work is being completes!
Thank you for your patience and again WELCOME HOME!
CLICK THE X IN THE TOP RIGHT CORNER OF THE BOX TO DISMISS THIS MESSAGE
My receiver is running that software version. In the product version you should have a date of 2013-6-26. That is the latest firmware date.
Sent from my SM-N900W8 using the SatelliteGuys app!
Sent from my SM-N900W8 using the SatelliteGuys app!
Ok, you need to upgrade the firmware. It can be found in the top stickie in this section along with instructions.
Sent from my RCT6573W23 using the SatelliteGuys app!
Sent from my RCT6573W23 using the SatelliteGuys app!
Similar threads
Users Who Are Viewing This Thread (Total: 0, Members: 0, Guests: 0)
Who Read This Thread (Total Members: 1)
Latest posts
-
T
-
T
-
T
-
T
