Well, I think I may have read it several times on this thread, but I need to ask this question to pinpoint the issue exactly:
For a couple of years, I've been using the ViP-622 using the component outputs in 1080i mode (my TV only supports 1080i and does not have a digital input).
However, I just bought a new 52" Sony XBR4 and it has HDMI inputs. So, I bought my HDMI cables and attempted to hook the 622 up to my surround sound receiver. The receiver did not recognize the 622. So, I completely bypassed the receiver and went directly to the TV.
ViP-622 HDMI output -----------> Sony XBR4 HDMI input 1
The Sony did not recognize the 622 and I only got a black screen as though nothing was even hooked up.
I called Dish Network technical support (yes, it was tech support and not just a CSR). They walked me though everything that I had already tried and it was a no-go for launch.
Here are my questions:
Thanks,
For a couple of years, I've been using the ViP-622 using the component outputs in 1080i mode (my TV only supports 1080i and does not have a digital input).
However, I just bought a new 52" Sony XBR4 and it has HDMI inputs. So, I bought my HDMI cables and attempted to hook the 622 up to my surround sound receiver. The receiver did not recognize the 622. So, I completely bypassed the receiver and went directly to the TV.
ViP-622 HDMI output -----------> Sony XBR4 HDMI input 1
The Sony did not recognize the 622 and I only got a black screen as though nothing was even hooked up.
I called Dish Network technical support (yes, it was tech support and not just a CSR). They walked me though everything that I had already tried and it was a no-go for launch.
Here are my questions:
- All of the reports I've seen on these boards are a bit confusing to me. Is the 622 famous for having faulty HDMI ports (hardware related) OR have people just been having handshake issues due to HDMI software versions? I've also heard reports of "my HDMI worked just fine before, but now it doesn't work." Is that just a case of Dish Network releasing a firmware update that changed the HDMI software and caused handshake issues? If it's harware related, would I need to get E* to replace it and, if so, can I use the external USB hard drive feature to keep my recordings?
- Can you confirm that the component output and the HDMI output on the 622 are "hot" at the same time? There is no menu option for turning on the HDMI port is there?
- Is there anything else you all can think of that might be causing the issue? Please note that I tried a couple of different HDMI cables and the cables that I tried DO work for other items in my theater (PS3).
- Are there any other Sony XBR4 users out there that have successfully received a signal from their 622 using HDMI?
Thanks,