This is a mobile optimized page that loads fast, if you want to load the real page, click this text.

help...anyone

Status
Please reply by conversation.

alpha3

Member
Original poster
Jan 7, 2010
5
0
philippines
im having a hard time setting up my DM500s together with my 8x1 diseqc switch..iim using 4 C band dishes..ranging from 1.8m to 1.2m in size...with multifeed scalar ring...8 sat reception in 4 dishes..in c/ku band...alll channels has been saved..with respective satellites..the only problem now is how to configure my box with 8x1 diseqc switch..please help..thanks in advance
 
8 ball


your answer may be here-


FTA / MPEG2 FAQ's - SatelliteGuys.US
 
im thinking the 8x1's are configured 1 of two ways. using diseqc 1-4 with 22k on / off or by using diseqc 1.2 positions 1 thru 8. my memory is getting rusty tho.

crackt out,.
 
@crackt..i tried it..using 22k on/off tone switch..with 2 diseqc 4x1..it does'nt work on my side..using DM500.. C-band sat on..ku band off..lots of power loss on my coaxial cable..@8 ball thanks..im going to give uit a try..and to all of you satellite guys..such a fast replies..
 
alpha3 said:
im having a hard time setting up my DM500s together with my 8x1 diseqc switch..
Click to expand...
Okay, a DreamBox 500 receiver, and which 8x switch do you have?
We have reviews of:
- DMSI 8X1 Diseqc Switch
- EMP Centauri 8 x 1
- Digiwave 8x1 uncomitted
... over in our Review Department.

Of the three, I wouldn't touch any but the Digiwave.
However, maybe the reviews will help you with whichever you have.

If that doesn't work out, here's an 8-input idea in our Switch FAQ.
Be sure to read the entire FAQ if you are unfamiliar with any of the info.
 
thanks a lot Lak7,1ADAM12,Anole,crackt...its working perfectly now! my DM500+8X1 DISEQC switch...won't be able to make it work without your help guys..setting: all uncomitted...once again thanks a lot!
 
Glad you got your problem sorted out. - :up

Post us a couple of bigger picture of that dish farm you've got.
Looks pretty imposing.
 
Anole said:
Glad you got your problem sorted out. - :up

Post us a couple of bigger picture of that dish farm you've got.
Looks pretty imposing.
Click to expand...
ok i will post the pictures later..just waiting for the sunrise..here the picture of the scalar rings that im using..frm the leftLNB'S)chinasaT6B,telkom1(as my primary),asiasat3s,asiasat5.all in 1.8m dish.the 2x1 scalar ring belongs to JCSAT3A(pimary) and asiasat4(secondary) in 1.5m dish
 
Last edited:
Status
Please reply by conversation.

Similar threads

Anyone in the Crossville Tennesee area?
Replies
1
Views
534
FTA4PA
F
Help Needed:
Replies
45
Views
4K
a33
A
Can anyone help me identify this dish?
Replies
2
Views
836
C-BAND Satellite Discussion
N5MBM Bill
M
Help
Replies
4
Views
740
FTA4PA
131W. Anyone getting it?
Replies
8
Views
1K
juventusbrown
J
Menu
Log in
Register