This is a mobile optimized page that loads fast, if you want to load the real page, click this text.

I have dish 1000 dish with 2 cables connecting to single node, will I be able to use dual node with

Z

zxcvb531

Member
Original poster
May 2, 2013
5
0
calif
just check my dish and found I have dish 1000 dish with 2 cables connecting to single node and no sign of a third cable, will I be able to use dual node with these cables, all schematics show 3 cables from dish to dual node[FONT=arial, sans-serif]. Currently have hopper sling and 2 joeys, I want to add another hopper sling and joey to my system[/FONT]
 
Nope. You must have 3 cables from a DPP switch to feed two Hoppers.
 
who's right, 3 cables from dpp switch (where is dpp switch) or can I connect the 2 cables from dish to dual node. right now 2 cables are connected to single node,
 
Sorry for the missing node info. You need 3 cables (one for each satellite location) going from a 1000.x combo antenna/LNB/switch going to the dual node. Then you need two cables going from the dual node to the two Hoppers.
 
You must log in or register to reply here.

Similar threads

What the hell...I have to pay to cancel
Replies
38
Views
3K
dishdude
Might have to cancel dish
Replies
17
Views
1K
tjboston5676
Dish approved to merge with EchoStar.
Replies
22
Views
2K
Juan
P
Must I use a switch or splitter between Dish Satellite and Receiver?
Replies
4
Views
701
Palmapple
P
R
DISH TV Antenna Dual Tuner
Replies
16
Views
1K
Foxbat
Menu
Log in
Register