If you are currently experiencing problems with the 110 satellites...

Matt

Supporting Founder
Supporting Founder
Oct 27, 2004
204
0
bcshields said:
Someone should call dish and tell them to unplug the birds and plug them back in.

If that doesn't work, ask them to take one satellite and move it to that location and see if the problem stays in the same place.

Hmm.. maybe the problem is because the satellites aren't properly grounded!

lol bcshields - a good one - maybe they might ask us to turn our dishes 360 degrees to reset them :D
 

cdru

Just another yahoo
Supporting Founder
Dec 4, 2003
1,117
0
Fort Wayne, Indiana
bcshields said:
Someone should call dish and tell them to unplug the birds and plug them back in.

If that doesn't work, ask them to take one satellite and move it to that location and see if the problem stays in the same place.

Hmm.. maybe the problem is because the satellites aren't properly grounded!
Priceless. You have my vote for post of the week. The only things that I would suggest is that you add two things. "Lets run a check switch test" and "Please wait while I bring up your account informatio<click>[dialtone]"
 

dstrouth

Supporting Founder
Supporting Founder
Was there an issue with 105 Transponder 2? Between 6A-7:30A when I left for work, All 3 of my receivers hooked to 105 was freezing, and intermittently losing signal when doing signal check. Reboot of all three receivers did nothing to fix issue. removing power from DPP64 and reapplying it didn't help. Signal on 105 was 74-76 then 0 instantly, and then in less than a second, back to 74-76....

This evening... working great!

ds
 

jgarrison

Supporting Founder
Supporting Founder
Mar 19, 2004
64
0
So I get my locals on 110. My 311 has them functioning properly again however my 811 and 522 still do not show them. I've tried resets, unplugging and check switches, nothing seems to be getting them to show up and its almost primetime! Any suggestions?
 

gunn55

SatelliteGuys Pro
Mar 24, 2004
171
0
Iceberg said:
huh?
Nagra2 has nothing to do with this...I have a new card :)
Nimiq2 is a Canadian satellite at 82W....not Dish Network ;)

Ice, I know there still can be something wrong with the way Nagravision2 encryption is being read by our cards, Just a long shot I guess. They are still don't have all the channels on it yet.
 

gunn55

SatelliteGuys Pro
Mar 24, 2004
171
0
bcshields said:
Someone should call dish and tell them to unplug the birds and plug them back in.

If that doesn't work, ask them to take one satellite and move it to that location and see if the problem stays in the same place.

Hmm.. maybe the problem is because the satellites aren't properly grounded!

Very good bc I like that.
 

Bulldog

SatelliteGuys Pro
Jan 22, 2004
546
0
bcshields said:
Someone should call dish and tell them to unplug the birds and plug them back in.

If that doesn't work, ask them to take one satellite and move it to that location and see if the problem stays in the same place.

Hmm.. maybe the problem is because the satellites aren't properly grounded!

Hmm-- This is how it started in Independence Day :eek: :shocked
 

Users Who Are Viewing This Thread (Total: 0, Members: 0, Guests: 0)

Who Read This Thread (Total Members: 1)

Latest posts