International 36" Satellite Dish (36 x 18)

Status
Please reply by conversation.

Morbius

SatelliteGuys Pro
Original poster
Dec 17, 2005
343
6
N.E. Ohio
18" is limited with FTA ,but what about a 36" x 18" Direct TV international (linear/oval) dish for something like G10. Anyone had any experience with with a dish that size for FTA.
 
There is a thread in the main area about a 36x20 and it will work pretty good. I used one for G10 and had semi-decent results. It did go out quciker than a 30" round dish but still held up good
 
I used one for a couple of months.
It was workable - but only just, for G10.
the 2 'awkward' TPs - 11720 V & 11800 V
would fade to pixellation threshold (around 30% Q) at times.
Worked fine for T5 (G25).

I since replaced it with a primestar 40x30 and those G10 TPs are 50%+

What's interesting is that the linear (Eagle aspen) LNB on the DTV has a flange mount feedhorn - which can be mated nicely with the primestar feedhorn - so you can use 13V/18V polarity switching.
 
I think I will have to go with something else. Those 2 tp's are the ones that i wanted and ontop of the dish size i have about a 200' cable run to deal with, so im sure that will have an effect on the quality also. Unless the price is right then I might just use it for KUIL (AMC4). I just need something at the cottage. We get absolutly no recption back in the woods.
 
Status
Please reply by conversation.

coolstat 6000 blind scan problem

Any Channel Manager for CW600Spremium?

Users Who Are Viewing This Thread (Total: 0, Members: 0, Guests: 0)

Who Read This Thread (Total Members: 1)

Latest posts