Is the stock HR20 remote RF compatible?
- Thread starter bertbarndoor
- Start date
- Latest activity Latest activity:
- Replies 2
- Views 2K
-
WELCOME TO THE NEW SERVER!
If you are seeing this you are on our new server WELCOME HOME!
While the new server is online Scott is still working on the backend including the cachine. But the site is usable while the work is being completes!
Thank you for your patience and again WELCOME HOME!
CLICK THE X IN THE TOP RIGHT CORNER OF THE BOX TO DISMISS THIS MESSAGE
- Status
Which model of remote? They have changed over time. If it is RF-capable, it will have an FCC ID label on the back, above the battery access door. Mine came with a RC34 and I suspect that new HR20s come with the RC-64R, both of which are IR- and RF-capable.
Mine that was installed a few weeks ago came with a RF/IR remote. Didn't realize this at first and used it in IR mode for a while. Discovered the RF function, attached the included antenna to the rear of the receiver and reprogrammed the remote for RF operation. That's the good news. Bad news, the receiver was much slower to respond to the remote. Changed it back to IR mode.
- Status
