is there any kind of splitter that will....

[robertjp]

Is there any kind of splitter than will send 1 satellite signal into 2 tvs without adding a second box? (aka- Like cable)

 

[oldford]

The new Directv receivers don't have an RF output, so you have to get an RF modulator and use that to send your signal around the house on channel 3 or 4 (analog). You can split that signal with common splitters.

GL, Eric

 

[jdspencer]

See my reply to a similar thread here.
http://www.satelliteguys.us/directv-forum/183183-how-output-feed-1-x-hr23-multiple-tvs.html

 

[RACJ2]

Is there any kind of splitter than will send 1 satellite signal into 2 tvs without adding a second box? (aka- Like cable)

As others suggested, RF modulators are an option if you only need an SD signal. Depending on how far apart the 2 TV's are, there are options to send an HD output as well. Monoprice has a few options, but the cheapest one would be to use the HDMI over cat 5e configuration in this link: For only $15.73 each when QTY 50+ purchased - HDMI over CAT5E / CAT6 Extender Wall Plate (Pair) - Single Port (1P) - White | HDMI Wall Plate

For under $20, you can go about 70' with this setup or a bit more if you use cat 6. Of course you would have to use component cables on the TV near your box or purchase an HDMI splitter. To get a total cost, you would have to add an additional HDMI cable and the cat 5e cable to the cost.