loading guide

[davidmustang]

Only getting a couple of transponders on 101. Now it is acquiring guide and can not see satellite. Any ideas guys? thanks, d

 

[Jimbo]

Only getting a couple of transponders on 101. Now it is acquiring guide and can not see satellite. Any ideas guys? thanks, d

What recvrs and dish are you using ?

 

[davidmustang]

Sorry, SLM3 and HD100.

 

[Jimbo]

Sorry, SLM3 and HD100.

Hmmm ...
HD100 doesn't sound right .

 

[davidmustang]

Hmmm ...
HD100 doesn't sound right .

It is H24- 100 receiver.

PLEASE LOG IN TO GET RID OF THESE ADS!

 

[raoul5788]

Is that a swm lnb? What are your signal strengths on all of the satellites?

 

[Jimbo]

Is that a swm lnb? What are your signal strengths on all of the satellites?

Good question ...

 

[davidmustang]

It is a SWM. On satellite 101- transponder 1 is 96, 2 is 0, 3 is 95, and the rest are zeros.

 

[raoul5788]

It is a SWM. On satellite 101- transponder 1 is 96, 2 is 0, 3 is 95, and the rest are zeros.

What about the other satellites? Or am I remembering correctly that you are only using the 101 satellite? You probably have a bad lnb.

 

[davidmustang]

Other satellite have zeros also. anyway to check to make sure it is the LNB before I buy one? thank you for your help.

PLEASE LOG IN TO GET RID OF THESE ADS!

 

[raoul5788]

Other satellite have zeros also. anyway to check to make sure it is the LNB before I buy one? thank you for your help.

Not that I am aware of. Even if it's not the lnb, it's a good practice to have a spare. They aren't expensive.

 

[davidmustang]

I will order one. Thanks for the information.

 

[raoul5788]

I will order one. Thanks for the information.

Check ebay.

 

[davidmustang]

Update. I unplug when I leave and when I come back I have to go through the whole set up. I get mostly zeros once I reload, unless I go to setup and reset SWM. Once I do that, I get everything. Is this normal. At least now I can watch everything.

 

[JohnL]

Update. I unplug when I leave and when I come back I have to go through the whole set up. I get mostly zeros once I reload, unless I go to setup and reset SWM. Once I do that, I get everything. Is this normal. At least now I can watch everything.

I had problems with my SWM LNBF a while back and it turned out to be the power supply to the SWM LNBF. I would guess you have a failing LNBF or the Power supply for it.

John

PLEASE LOG IN TO GET RID OF THESE ADS!

 

[TheTechGuru]

I once had weird numbers and 0's on blocks of TP's. Turned out to be water in a connection.