The manhattan 3.4 thread got so long I lost where we are.
If I install 3.4 can I run a DiSEqC 1.2 motor AND a 1.0 or 1.1 switch ?
If I install 3.4 can I run a DiSEqC 1.2 motor AND a 1.0 or 1.1 switch ?
Manhattan ver 3.4 where are we?
- Thread starter Pixl
- Start date
- Latest activity Latest activity:
- Replies 5
- Views 1K
-
ENJOY SATELLITEGUYS AD FREE THIS FEBRUARY!
Thank you to the very generous support we got from our members in December we have decided to make the month of February AD FREE for everyone!
We want to see the true speed of our site and enjoy SatelliteGuys the way it was meant to be enjoyed!
If you would like to help us keep the lights on and keep enjoying the site AD FREE consider becoming a PUB MEMBER by CLICKING HERE.
THANK YOU TO EVERYONE FOR YOUR SUPPORT!
- Status
Ok.
Just seems to me there was still some motor/switch issue remaining or something to do with 22k
Just seems to me there was still some motor/switch issue remaining or something to do with 22k
I think there is an unresolved issue with some 22khz switch configurations, but I haven't had any problems in my setup, Jim . 
Do you know if it will control a universal lnb that calls for 22k for the high band, along with diseqc 1.0, 1.1, and motor 1.2 ?
I tested that configuration and I believe it works. I only used about 3 sats though on Diseqc 1.2, since I prefer USALS for Ku motors. [edit] See post 31 of this thread, http://www.satelliteguys.us/free-air-fta-discussion/269067-manhattan-update-3-4-thread-4.html . You will see the problems that still seem to exist with the 22khz implementation. I believe it boils down to not being able to make settings "sticky", for each satellite. I might be wrong.
[edit] See post 31 of this thread, http://www.satelliteguys.us/free-air-fta-discussion/269067-manhattan-update-3-4-thread-4.html . You will see the problems that still seem to exist with the 22khz implementation. I believe it boils down to not being able to make settings "sticky", for each satellite. I might be wrong.
Last edited:
- Status
Similar threads
