Multiswitch problem

Status
Please reply by conversation.
U

utabb

Thread Starter
Member
Jan 21, 2005
8
0
I used an Eagle Aspen non powered 3x4 multiswitch to split a DirecTv Dual LNB for a Hughes DirecTIVO install. At first I had only one line to the TIVO and one line to a RCA receiver. That worked fine, except both receivers had to be turned on to get even and odd polarity channels. I hooked a third line to the 2nd input on the TIVO and both TIVO tuners work fine, now I cant get any signal on the RCA receiver. Any help and/or suggestions are appreciated. Steve :confused: :confused:
 
jdspencer

jdspencer

SatelliteGuys Pro
Oct 22, 2004
4,088
18
Binghamton, NY
Try using different outputs from the multiswitch. Check for bad cables. The multiswitch may have failed.
 
D

dgordo

SatelliteGuys Pro
Aug 2, 2004
324
1
Chicago
Sounds like a bad multiswitch.
You do have both lines from the dish going into the switch, correct?
 
Status
Please reply by conversation.

Similar threads

T
Replies
2
Views
1K
boba
S
Replies
1
Views
1K
HCI
J
Replies
3
Views
947
techdood
techdood
G
Replies
2
Views
2K
Gus_Smedstad
G
S
Replies
5
Views
2K
B
Top