NEW Dish Need help !

[koko123]

How are ya guys ....

I just bought a new 33" dish Q Sat, the dish have 3 diffrent holes:

Angle 18 - 65
Angle 60 - 90
Angle 0 -20

My question is what hole should I use?

To make sure I have everything right my (Latitude is 42.3 and longitude is 71.1) what number should be on the dish and what number should I use on the SG2100?

My last question I have Fortec Star Lifetime Ultra Receiver, and I have Digiway (DG780) KU Band LNBF, should I set my Fortec to Standard or Univ ?
Thank you soooo much in advance

 

[Mr Tony]

I would use the 18-65 angle...that would cover most of the US

Check on the LNB for any markings for frequencies…when in doubt, use standard : )

 

[PSB]

On the SG2100 use..........

Motor elevation = 48 deg. (one side of the motor is deg. and the other is Lat.)
Dish Elevation = 24 deg.

 

[koko123]

great thank you ... on the dish there is 2 diffrent numbers top and bottom and they don't go together what should I use ...

Thanks

 

[koko123]

Guys I have the TV outside ... quick question should I point bat AMC 6 or SBC 6 ?

any live feed on AMC6 or what freq should I uses to istall the true south ...

Thanks guys

PLEASE LOG IN TO GET RID OF THESE ADS!

 

[PSB]

Nothing to point at on AMC-6.........I would use "ONN" on the SBS6 satellite

http://www.lyngsat.com/sbs6.html

I would remove the motor and find the satellite first.