No signal on new setup

[onceydoce]

Saturday i bought a 1.2m FortecStar with a Sadoun DG 380 from Sadoun.So far so good.
I setup the dish including the motor on a plum 2" pole in my yard.
My setting are as the folowng:
My Latitude: 38.95,Longitude: 84.66
Motor Latitude:39
Dish Elevation 29
For the setup i am using a TechSat Trecker II+ lnb.
I tryed to aim the dish at AMC 3 & 9 since they have the best proximity to my true south.I choose not to use AMC 13 since it only has feeds on it.

I tryed the following TP on these Birds:
AMC3 11736 V SR 8333

AMC9 11735 H SR 4444

On both i get a Q ranging from 78 - 91 but no S at all.
What am i doing wrong?

I hope someone can give me an adives or two how to get all this setup.

Thanks in advance
Onceydoce

 

[Lak7]

What did you enter into the Receiver's Sat Setup menu?

Go here for curent Hot transponders...
SatelliteGuys.US - TheList
It's OK if the last number is 1 or 2 off from what the receiver has listed

 

[onceydoce]

What did you enter into the Receiver's Sat Setup menu?

Go here for curent Hot transponders...
SatelliteGuys.US - TheList
It's OK if the last number is 1 or 2 off from what the receiver has listed

Lak7,
I am using a meter (XFTP SA-2150)

 

[Lak7]

I believe you still need to enter the proper LNB L.O. and select a Hot Transponder.

 

[onceydoce]

I believe you still need to enter the proper LNB L.O. and select a Hot Transponder.

My meter settings look as the following:
AMC9
LO: 10750
SR:4444
L:-83.0
DiSEqC: Off
F: 11735
LNB:18V
22KHz: Off

 

[Lak7]

L.O. looks good at 10750.
Using a compass, you should be pointing to 185 South.
Double check you are using the correct indicators for the Motor Lat and Dish Elevation.

That TP is not the easiest to hit, I would try for AMC3 first.

 

[cruzin]

Just a thought, Why do you have the lnb set to 18v. If you are not going through a switch shouldnt it be set to ON?

 

[Mr Tony]

on his meter the 18v would be horizontal polarity

13v for vertical