Prime Star 1.0 x .7 dish - need help making lnb arm

[Jullius]

I picked up a primestar 1.0 x .7 meter dish. It is missing the arm that holds the lnb. Could someone who has one of these help me out by measuring the length and angles at which I would need to make a replacement.

Thanks

 

[Anole]

I've seen posts here referring to a surplus dealer who carries replacement parts like that.
Knowing this info, you might try searching the FTA department for more info.
Or, I suspect, someone who remembers the company name, will post a link for you shortly. - :up

Congrats. That's a nice dish!

 

[Jullius]

Thanks I searched and found a post of me asking for links to Primestar / Channel Master parts vendors, from a month ago. I have a short memory. lol That sure beats making one myself.

One question for those who know Primestar dishes... Is the 1.0 x .7 the same as an 84e?

I've seen posts here referring to a surplus dealer who carries replacement parts like that.
Knowing this info, you might try searching the FTA department for more info.
Or, I suspect, someone who remembers the company name, will post a link for you shortly. - :up

Congrats. That's a nice dish!

 

[Larobpra]

One question for those who know Primestar dishes... Is the 1.0 x .7 the same as an 84e?

Probably. My 75E measures 90cm x 67cm (.9 x.67). Look on the back, the model number may be stamped in.

 

[gremlin411]

Yes I have one of each and they are the same size.

40 X 30

 

[meinename]

And the link is here:
https://www.impaktproducts.com/Dish-Parts-Mounts-and-Accessories-p-1-c-296.html
The arm:
https://www.impaktproducts.com/Channel-Master-Support-Arm-84E-p-16488.html

LNB w/feedhorn:
https://www.impaktproducts.com/Channel-Master-LNBF-Dual-Polarity-p-16490.html
https://www.impaktproducts.com/Channel-Master-LNBF-Single-Polarity-p-16491.html

 

[Mr Tony]

congrats on the dish Julius!

I have 3 of those and they are great dishes

 

[Jullius]

Thanks for the help. I just ordered a replacement arm.