My numbers are added to the list using a bsc-621 and 10 foot mesh SAMI dish. Pansat 9200
G15 - 133W 3745 H C-Band digital 72% SQ-----68% SQ My . sq 72
G27 - 129W 11964 H Ku digital 72% SQ-----68% SQ-----63% SQ my sq ?
G10 - 123W 11718 V Ku digital 75% SQ-----73% SQ-----73%SQ my sq 72-76
G11 - 91W 3720 H C-Band digital 78% SQ-----78% SQ-----80%SQ my sq 80
G11 - 91W 12062 V Ku digital 60 - 65% SQ-----58 - 61 SQ-----17%SQ ?
AMC3 - 87W 12144 H Ku digital 70% SQ-----55% SQ-----17%SQ my sq 55-61
AMC2/16 - 85W 12195 H digital Ku test card 80% SQ-----70% SQ-----23%SQ
AMC2/16 - 85W TP 24 analog had an almost sparkle free picture. Clear with co-rotor.
G17 - 74W 11734 H digital Ku 80% SQ-----75% SQ-----80%SQ my sq 85-90
AMC6 - 72W 12053 V digital Ku 72% SQ-----72% SQ-----67%SQ my sq 72
AMC6 - 72W 4043 V digital C-Band 77% Sq-----75% SQ-----72%SQ my sq 93
IS9 - 58W 4040 H digital C-Band 75% SQ 81% SQ my sq ?
a couple of the sats above I don't have programmed.
Those are my numbers after "my sq".
I have much stronger H polarities than vertical (I need to adjust skew).
On my 4dtv I have to really skew the lnbf to get big number on HBO G15.
I can tune it to get 99% channels 112 and up , 85% on 100-111 hbo's.
Only problem is I can't get much of anything else on the eastern arc without adjusting the skew.
I can also on AMC 3 KU band have a low signal, bump the dish a couple of bumps-losing the signal, bump it again and boom locks in at high 50's. Odd that I can lose the signal between bumps and then get it again. What have I done wrong - Focal point, F/D. ?
G15 - 133W 3745 H C-Band digital 72% SQ-----68% SQ My . sq 72
G27 - 129W 11964 H Ku digital 72% SQ-----68% SQ-----63% SQ my sq ?
G10 - 123W 11718 V Ku digital 75% SQ-----73% SQ-----73%SQ my sq 72-76
G11 - 91W 3720 H C-Band digital 78% SQ-----78% SQ-----80%SQ my sq 80
G11 - 91W 12062 V Ku digital 60 - 65% SQ-----58 - 61 SQ-----17%SQ ?
AMC3 - 87W 12144 H Ku digital 70% SQ-----55% SQ-----17%SQ my sq 55-61
AMC2/16 - 85W 12195 H digital Ku test card 80% SQ-----70% SQ-----23%SQ
AMC2/16 - 85W TP 24 analog had an almost sparkle free picture. Clear with co-rotor.
G17 - 74W 11734 H digital Ku 80% SQ-----75% SQ-----80%SQ my sq 85-90
AMC6 - 72W 12053 V digital Ku 72% SQ-----72% SQ-----67%SQ my sq 72
AMC6 - 72W 4043 V digital C-Band 77% Sq-----75% SQ-----72%SQ my sq 93
IS9 - 58W 4040 H digital C-Band 75% SQ 81% SQ my sq ?
a couple of the sats above I don't have programmed.
Those are my numbers after "my sq".
I have much stronger H polarities than vertical (I need to adjust skew).
On my 4dtv I have to really skew the lnbf to get big number on HBO G15.
I can tune it to get 99% channels 112 and up , 85% on 100-111 hbo's.
Only problem is I can't get much of anything else on the eastern arc without adjusting the skew.
I can also on AMC 3 KU band have a low signal, bump the dish a couple of bumps-losing the signal, bump it again and boom locks in at high 50's. Odd that I can lose the signal between bumps and then get it again. What have I done wrong - Focal point, F/D. ?