This is a mobile optimized page that loads fast, if you want to load the real page, click this text.

Remote

Status
Please reply by conversation.
If it's with an HR24 or newer, they practically set themselves up. Which receiver/dvr do you have?
 
I'm guessing one is set to ir and the other to rf. Go into the menu of the dvr and change whichever it is set at.
 
I already have one remote that works I am using the other remote for the tv upstairs which isn't working if I change the Ir to RF the one remote that is working the other one may not work.Thanks for your help
 
the remote that is NOT working:

move the switch to D* mode (if its not already)
open the door by the access card
get the last 6 digits of the number on the sticker above/below the access card
press mute+select on remote, light at top will flash twice after about 2s
press 9-6-1, channel up, light will flash twice again
put in the 6 digit number you got from the sticker

new remote should be programmed now


if that fails, use the working remote to go into settings > remote > advanced > ir/rf > choose rf from the drop down > program new remote from on screen instructions.
 
Reactions: Jimbo
Can this info be somewhere in a D* Sticky so people can find it, we use to have a Sticky for stuff like that.
 
Status
Please reply by conversation.

Similar threads

Can't find remote code for my TV
Replies
7
Views
706
WinterWinds
J
Remote Setup
Replies
1
Views
788
raoul5788
DIRECTV RC80 Remote
Replies
1
Views
1K
Jimbo
  • Locked
shut off both boxes at the same time how do I set it up to have both boxes to shut off separately with remote?
Replies
4
Views
721
raoul5788
C
Channels change themselves without touching the remote. Directv Stream with ospray devices.
Replies
3
Views
1K
primestar31
Menu
Log in
Register