Resetting Lock?

R

roadrhino

SatelliteGuys Family

Original poster

May 11, 2004

74

0

• Aug 30, 2004

• #1

Hi,

I just obtained a new (for me) receiver at a yard sale that I intend to use as a backup. However, when testing it out, it seems to have a lock on the system. I went back and asked the former owner who says something like "I don't remember ... all sales final." Not too big of a deal, because I only paid $5.

However, I am wondering whether there is any way to reset the lock feature of a 2700.

Any thoughts?

Roadrhino

 

thiggin2

Supporting Founder

Supporting Founder

Mar 28, 2004

1,632

5

TampaBay Florida

• Aug 30, 2004

• #2

You can read this thread it might work for you.
http://www.satelliteguys.us/showthread.php?t=20827

But if you do a memory dump you will need to do a switch check.

 

GaryPen

Rich or poor, it's good to have money.

Supporting Founder

Mar 2, 2004

16,677

605

I only lived in California. I'm FROM Brooklyn.

• Aug 30, 2004

• #3

He should do that anyway when connect a "new" receiver to his system.

 

F

fire_317

SatelliteGuys Family

Jul 21, 2004

69

0

• Aug 31, 2004

• #4

I had this same thing happen to me. I just called Dish Tech Support and they were able to send a signal to it to unlock it. It took maybe 3 minutes total time!

 

md_paul

SatelliteGuys Pro

Oct 3, 2003

578

169

Maryland

• Aug 31, 2004

• #5

fire_317 said:

I had this same thing happen to me. I just called Dish Tech Support and they were able to send a signal to it to unlock it. It took maybe 3 minutes total time!

Click to expand...

This is a normal service Dish performs. If you have features locked and forget your passcode, you can call them and they can remotely reset the code and disable locks. The important thing to remember is that when they send the unlock code to your receiver, it will unlock all receivers on your account. If you have locks on other receivers in your home, they will be disabled when you request the lock reset.

- Paul

 

R

roadrhino

SatelliteGuys Family

Original poster

May 11, 2004

74

0

• Aug 31, 2004

• #6

Thanks to you all and to Joe236 who wrote:

Joe236 said:

Should be able to dump the memory by pressing

Menu
6
3
(within 4 seconds press the keys below)
info
Browse/Right Arrow
Theme/Left Arrow

You should now get the device status & memory dump screen. Press (tv/video) if that does not work, then press the (info) button. A non-volatile memory corrupt message should display. You need this message so if you don't get it start over.

Once you the the non-volatile message you need to unplug your reciever for 15 seconds then plug back in and everything should be reset.

Click to expand...

my "new" receiver is now unlocked and works great!

All the best ...

Roadrhino