This is a mobile optimized page that loads fast, if you want to load the real page, click this text.

Rusted nuts project

Status
Please reply by conversation.

danristheman

SatelliteGuys Pro
Original poster
Jan 25, 2011
3,146
1,142
85w
Today was fun got a 6 foot satellite dish petal style. I had to use a grinder on the bolts took 3 hours i am going to take it to machine shop to smooth out any dents. Plus here are some other dishes people can have here.
 

Attachments

  • 20171219_161016.jpg
    19.5 KB · Views: 209
  • 20171219_153346.jpg
    46 KB · Views: 192
  • 20171219_130751.jpg
    18.1 KB · Views: 191
  • 20171219_115332.jpg
    30.1 KB · Views: 185
  • 20171219_153338.jpg
    44.6 KB · Views: 175
  • 20171219_153408.jpg
    48 KB · Views: 178
  • 20171219_115322.jpg
    28.3 KB · Views: 169
Only tool i had. i am going to take down my 4 footer and put up the new one.
 
Dan, can you grab the feed/stuff off the other dish and send if I pm you a shipping label? I what to take it apart and see what it looks like
 
Which dish wallyhts? Be more spefic. The 6 foot prodlein the guy still has the inhouse transmitter unit. The unit that looks like a computer tower but transmit a signal back to the satellite.
 
Nice find Dan.
A block of wood, a rubber mallet and some white paint and you'll be good.

Little dents aren't as important as the true shape of the parabola - did it pass a string test?
 
The 6 foot prime focus dish had the lnb arms messed up when they took it off the dish off the roof. I have to do the string test but to me when i look it over it looked fine. The other dishes i will get to them next week. I have to make up my own mount for that dish. I see a Directv mount for that dish.
 
Reactions: MosFET77
Status
Please reply by conversation.