FREE Satellite Equipment

[babnmn]

One 7.5 ft Mesh dish , 3 primestar oval dishes , one small channel master fiberglass dish , 3 mpeg2 receivers , several LNB's and feedhorns. Older HTS remotes. Phoenix, Az Area , chaparral analog receiver / mover

 

[primestar31]

One 7.5 ft Mesh dish , 3 primestar oval dishes , one small channel master fiberglass dish , 3 mpeg2 receivers , several LNB's and feedhorns. Older HTS remotes. Phoenix, Az Area , chaparral analog receiver / mover

What kind of feedhorns do you have? Any orthomode types? If so, what kinds? I'm looking for one, but don't need lnb's.

 

[raydio]

One 7.5 ft Mesh dish , 3 primestar oval dishes , one small channel master fiberglass dish , 3 mpeg2 receivers , several LNB's and feedhorns. Older HTS remotes. Phoenix, Az Area , chaparral analog receiver / mover

I may be interested in the mesh dish and the Channel Master dishes...what size is the fiberglass dish? Does the mesh dish break down...four pedals? If live in the Albuquerque area but travel over your way all the time for work.

 

[primestar31]

I've posted here, and sent PM and no replies as of yet to my question above.

 

[KE4EST]

OP has not logged in, in over 3 days.

 

[primestar31]

OP has not logged in, in over 3 days.

Still nothing. No replies to either posts or PM's.

 

[babnmn]

7.5 mesh has 3 panels. see pictures for model numbers of primestar and channel master dish. Also CR10 is avaiable . Micro Hd receiver , dreambox 800HD , Fortec Star ( mpeg2) and clone mpeg2 receiver. And two Von Weise movers.

 

[primestar31]

PM sent about MicroHD receiver.

 

[babnmn]

I also found 2 BLSA satellite cards and Kworld sat tuner card

 

[Lone Gunman]

Can't believe that someone mounted that Von Weise actuator wrong. Motor is suppose to be ON TOP, NOT BOTTOM!!

 

[waylew]

Can't believe that someone mounted that Von Weise actuator wrong. Motor is suppose to be ON TOP, NOT BOTTOM!!

It's in Arizona,rain aint much of an issue

 

[babnmn]

The 7.5 dish and Von Weise went to the scrap yard today. Prime Star and CM dish to follow.

 

[martin-f]

and feedhorns

ADL-RP2-CP-300 or ADL-RP2-CPOR100
Hi do you have any of the above, cash waiting for either/both models please pm me with price shipped to UK if so.

 

[babnmn]

no ADl's . Sorry

 

[Lone Gunman]

It's in Arizona,rain aint much of an issue

Picked up one that was mounted like that locally a few years ago and you wouldn't believe what the inside of that thing looked like!! It couldn't have been any worse if all those motor and gearbox parts had of been laying out in the woods in the open! IIRC I junked about 90% of it and that's saying something because I'm a pack rat and I don't usually throw anything away.

Remember this from a couple of years back...............

Never throw it away, almost never!

 

[waylew]

I'm a pack rat and I don't usually throw anything away

I resemble that remark
When I throw something out,absolutely no one would want it.And if I had more room I'd still have it.

 

[martin-f]

no ADl's . Sorry

Many thanks for looking, if anyone looking in has the ADL i am searching for please contact me.

 

[raydio]

Wish you would have responded to my message of September 1, I would have saved the 7.5 from the scrap yard...what a waste -

Do you have anything left? I am in the area the rest of this week until 10/25

 

[Richard’s Sullivan]

What kind of feedhorns do you have? Any orthomode types? If so, what kinds? I'm looking for one, but don't need lnb's.

I live in scottsdale

What kind of feedhorns do you have? Any orthomode types? If so, what kinds? I'm looking for one, but don't need lnb's.

i live in Scottsdale do you still have this.

 

[KE4EST]

i live in Scottsdale do you still have this.

Well....it was posted almost two years ago so....