SatMex 5 !!!!!!!

[lgor]

Can I get 116.8°W SatMex 5, Solidaridad 2 at 113.0°W & PAS 3R at 43.1°W with pansat 2500A in Norther california?
Thank you

 

[PSB]

I use this sometimes, click on the satellite you are interested in then drag the yellow dot on the map to where you are!

http://www.lyngsat.com/tracker/america.html

http://www.lyngsat.com/tracker/atlantic.html

 

[Mark_AR]

Can I get 116.8°W SatMex 5, Solidaridad 2 at 113.0°W & PAS 3R at 43.1°W with pansat 2500A in Norther california?
Thank you

SatMex - Yes
Solidaridad 2 - Yes
PAS 3R - No (Too near or below horizon)

Even in San Diego the Elevation is only 4.6.

http://www.sadoun.com/Sat/Installation/Satellite-Heading-Calculator.htm

 

[lgor]

Thank you guys.
I have another quick questuion.
Can i use the DISH Pro 500 Antenna to get "SatMex" or i need the 30' antena?

 

[carload]

You need a lot of real estate for a 30-foot antenna!

Yes, you need a Ku-band dish (30 or so inches) for the Ku channels (5-digit frequencies), or a C-band dish (6 feet or more) for the 4-digit frequencies.

PLEASE LOG IN TO GET RID OF THESE ADS!

 

[PSB]

You would also have to change the L.O. settings in antenna set up screen if you change LNB's

KU band LNBF L.O.= 10750
DBS LNB L.O.= 11250

 

[mkm4]

Thank you guys.
I have another quick questuion.
Can i use the DISH Pro 500 Antenna to get "SatMex" or i need the 30' antena?

Most of the FTA on SatMex 5 is C-Band and Solidaridad 2 is only C-band, so you'll need a large dish. 10 foot would be optimal.

 

[Mr Tony]

but if he doesnt have the real estate, a 30" minimum dish is needed

 

[mkm4]

but if he doesnt have the real estate, a 30" minimum dish is needed

But not for what the original poster wants to receive.