SG2100 motor won't move east past 105w

[rrob311]

I noticed last night when trying to watch SES1 that my SG2100 is stopping at 105w and won't go past that bird heading east. It moves fine back to 125w. I tried my openbox and then my Sonicview and they both stop in the same spot. How can one reset these motors or see if it is jammed?

 

[Lak7]

Possible a Limit is set?
Clear any Software Limits that a receiver may have set.
There should be set-screws on the Motor for setting Physical Limits.

 

[rrob311]

I tried to reset it but I think I reset it in the wrong spot. Do you have to center it somehow? When I tell it to go to 30w it goes to about 72w. How to I reset the USALS?

 

[brentb636]

You have to reset it with the arrow pointed to the zero degree position. That should re-establish zero ... SHOULD