Sorry if this has been asked before but is this supposed to be mounted outside?
Posted Via The FREE SatelliteGuys Reader App!
Posted Via The FREE SatelliteGuys Reader App!
Those cables are fine, as long as it's not a direct 90 they should be fine ...I'd be a bit concerned about how some of the cables are angled. They should come straight out of the connector before turning.
Sorry, I didn't look closely enough ... a bit more slack would be helpful.The way some of them exit the connector will eventually cause the cable loosen. There shouldn't ever be any pull on a connector.
I do that all the time.You can stabilize the SWM-16 to the wall or surface with only 2 screws as shown in the picture? If that's true,it gives me a lot more options when I install mine.
You can stabilize the SWM-16 to the wall or surface with only 2 screws as shown in the picture? If that's true,it gives me a lot more options when I install mine.
That's good to know,as soon as I get the cut to length coaxial cables,SWM 4-way splitter,& screws that I ordered,I'm installing the SWM-16(SL-3 4 cable LNB) I have now so I can reactivate my repaired HR23-700 to go with my HR24-200,HR24-500,& HR22-100 DVR's,& H25-500 & H24-700 receivers for 10 tuners total. Only having to use 2 screws really helps a lot.It's pretty stable.
Posted Via The FREE SatelliteGuys Reader App!
Cool !Thanks to everyone for their input.
Also there was some slack in the lines so I don't have as much of a bend coming out of the SWM now.
Posted Via The FREE SatelliteGuys Reader App!