They're here again...

Cascade

Goose.
Supporting Founder
Jun 1, 2004
1,457
0
37.134004N 76.561779W
He's outside running direct burial cable, it's orange and beefy and looks the part.
He's wired the superdish up and grounded it.
I'll post some pics later.
I don't know if this will help with the 105 probs but he sure does some *very* nice work.
 

Cascade

Goose.
Supporting Founder
Jun 1, 2004
1,457
0
37.134004N 76.561779W
This is the first time I've been happy with an install.
He replaced the cable with flood rated co-ax.
He grounded the dish properly.
He buried all the cable.
The 301 and the 522 were both tested on both lines from the SW34, it turns out the 522 is faulty and intermittently drops the signal on all 3 satellites on both inputs, Dish have sent out another 522.
Signal levels are good.
The wiring is exactly as I would have done it.

Cliff's done a truly superb job. I honestly can't say enough about this guy.
 

Mr Tony

SatelliteGuys Pro
Supporting Founder
Nov 17, 2003
3,664
16,020
Mankato, MN
Cascade said:
This is the first time I've been happy with an install.
He replaced the cable with flood rated co-ax.
He grounded the dish properly.
He buried all the cable.
The 301 and the 522 were both tested on both lines from the SW34, it turns out the 522 is faulty and intermittently drops the signal on all 3 satellites on both inputs, Dish have sent out another 522.
Signal levels are good.
The wiring is exactly as I would have done it.

Cliff's done a truly superb job. I honestly can't say enough about this guy.

Bout time they got it fixed :):D
 

Cascade

Goose.
Supporting Founder
Jun 1, 2004
1,457
0
37.134004N 76.561779W
IMG_4513.jpg


IMG_4516.jpg
 

ShadowEKU

Expert in the Making
Supporting Founder
Jul 13, 2004
1,829
0
Frankfort, KY
He even put terminators on the cascading ports :shocked :shocked

That is a nice job... do you get alot of freezes where you are? if so those zip ties wont last terribly long.
 

522 or 721

Dish 811 problems

Users Who Are Viewing This Thread (Total: 0, Members: 0, Guests: 0)

Who Read This Thread (Total Members: 1)

Top