Just a few days ago I got a shiny new Pansat 3500sd in the mail, along with a 100cm dish, and a standard digital lnbf. I'm pretty sure I have the setup ok, as I aligned it to a few different sats (echostar 3, galaxy 11, ect.) that I could get in my area, and even hooked up the signal finder and fine-tuned it.
The problem though is that while I get 80-85% signal reading on the reciever, the quality level is at 0. I know other people have asked the same question, and that the problem could be a number of things, but any suggestions would be really helpful.
thanks,
oceanplexian
				
			The problem though is that while I get 80-85% signal reading on the reciever, the quality level is at 0. I know other people have asked the same question, and that the problem could be a number of things, but any suggestions would be really helpful.
thanks,
oceanplexian
 
	 
	 
 
		
 
			
 
			 
 
		 
			 ...because I just don't get it....
 ...because I just don't get it.... 
 
		 
 
		

 
 
		 
 
		 
 
		 
 
		 
 
		