TV2 UHF remote

[peste19]

I have a Vip722k with dual mode and the 2nd tv is like 10' away from the receiver but the tv2 remote only works if its right in from of the receiver, i have changed the batteries, any ideas?

Is it possible to change the frequency of them in case there is some kind of interference

thanks in advance

 

[mdavej]

Mine was similar until I switched to B band. Now I easily get 40' range through a couple of floors and walls.

 

[peste19]

Mine was similar until I switched to B band. Now I easily get 40' range through a couple of floors and walls.

how can i do that?

 

[KAB]

Even/odd #channel address. Change one number up or down, or odd/even from where you are now, but IMO, it probably wont change too much. Try rasing the antenna with some coax or do this:
http://tech.dishnetwork.com/departmental_content/techportal/Images/Tech/remotes/RemoExtend1.jpg

And to those two or three who will say it's a bad idea. GEE, it's a bad idea that works!

 

[Jimmerinwi]

And to those two or three who will say it's a bad idea. GEE, it's a bad idea that works!

there are always those who say it affects PQ. But if you use good quality splitters, there is little to no PQ loss.

Sent from my iPhone using SatelliteGuys

 

[Lord_Vader]

You could strategically place a child or spouse with the remote.