Using USALS with Fortec Mercury II

[satcustomer]

Quick question. My true south satellite is G10R @ 123W. On the set-up screen, after moving the motor to zero and entering my latitude and longitude, the receiver should move the motor to somewhere off zero, right? I just wanted to be sure that when peaking my true south satellite the motor shouldn't stay at zero.

 

[PSB]

If your Latitude is ANYTHING other than 123ºw the motor will move!

 

[satcustomer]

Yes, my Latitude = 121.9 and the motor moved slightly off zero.

 

[PSB]

Yes, my Latitude = 121.9 and the motor moved slightly off zero.

Perfect, now just peak the dish/motor assembly and you should be good!