Visionsat Blind Scan Quirk

[DocRobster]

I think it may have been talked about but I want to see if others who do a blind scan with the Visionsat always get their frequencies off by a 1000 MHz. For example I was scanning H2 looking for 4:2:2 feeds and one shows up 11144 with a SR of 3970. Now I know that is too low to enter into my PC DVB system as I know the real frequency is 12144.

Can anyone explain? I am using a Standard LNB @ 10750.

 

[Mr Tony]

weird...I know the visionsat can be off by a couple (like 11731 instead of 11733) but I havent heard it off by 1000

are you sure the LNB LO is set up for 10750?

 

[DocRobster]

Well I just checked and I have the upper and lower set for "universal" and LNB frequency is 9750 - 10750.

Is there a section to change the LO ? I am assuming that if I did have it set correctly to begin with, then I wouldn't get a signal.

any other ideas?

 

[Lak7]

Change LNB setting from Universal to Standard then L.O. to 10750

 

[Mr Tony]

change LNB type to single then change LNB frequency to 10750

 

[DocRobster]

Let me go test that right now on H2...

 

[DocRobster]

WORKED!!! thanks!

 

[Mr Tony]

no problem