Weird problem.

Status
Please reply by conversation.
bobsav2001

bobsav2001

Thread Starter
SatelliteGuys Pro
Sep 5, 2008
155
13
St rémi Québec Canada
Stb AzBoxminiMe 4 sats 87W-91W-97W-107.3W all KU band and all are working fine.
S2 on 87W and 4.2.2 on 107.3 are fine.
Problem is SES2 87W all channels are ok but The Patient ch.
It will take 30 seconds for the quality bar to come on.
Signal at 70 quality at 86 but no video no audio.
This ch came on only about 5 times in 2 weeks with good picture and sound.
I know it is a low SR but Katel (Telemundo) is even lower and ok.
Patient ch is perfect on my cheap Ariza stb.
Any one with a miniMe noticed that issue?
Thanks Bob....
 
northgeorgia

northgeorgia

SatelliteGuys Pro
Nov 14, 2011
1,538
195
North GA
I can't provide a lot of knowledge here, but when I've had stations with a good signal but with blank screens/audio I have just rescanned the transponder and it comes in just fine. Have you tried this yet? (microHD here, not miniMe)
 
FaT Air

FaT Air

HOA Free Zone
Feb 27, 2010
6,668
914
97W 48N
Patient ch is perfect on my cheap Ariza stb
Sounds like there's something particular to that signal the Az receiver doesn't like. MiniMe owners - speak up.
 
bobsav2001

bobsav2001

Thread Starter
SatelliteGuys Pro
Sep 5, 2008
155
13
St rémi Québec Canada
I found my problem i changed the lnb freq from 11800 H 2686 to 11805 H 2686
rescaned the new freq and i get it evrey time.
My lnb must be off a bit.
Thanks Bob....
 
  • Like
Reactions: northgeorgia
KE4EST

KE4EST

SatelliteGuys Is My Second Home
Staff member
HERE TO HELP YOU!
Lifetime Supporter
Aug 9, 2004
26,224
6,471
EM75xb
Just read this and I see you found it...but I was gonna say something is drifting in Freq. some where.
 
Cham

Cham

VE4GLS
Pub Member / Supporter
Dec 19, 2008
2,442
1,005
Boonies
My Azbox & Titanium PLL LNBF says 11801 H 2686 and comes in around 90%Q on the 90cm dish/motor. Keep in mind I am using an Ultra not a mini-me, might be different hardware and certainly different software. Tunes in instantly when switching to the Patient Channel from any other TP on that sat in my list.

Will do a re-scan just for fun...

edit:
scans in same as before. Check your FEC, mine shows 7/8. If it is set to "auto" it might take extra time for the receiver to find...
 
Last edited:
Status
Please reply by conversation.
Top